Skroutz.mt

Pedrollo Top 2 Floor Single-phase Water Pump 0.5hp 100208 100.208
Submersible Water Pumps

Pedrollo Top 2 Floor Single-phase Water Pump 0.5hp 100208 100.208

The pumps in the TOP FLOOR range are suitable for use in clean water, without corrosive elements, and offer the maximum possible drainage.

  • Type: TOP 2 FLOOR
  • Pump Type: Open impeller
  • Power Supply:...

The pumps in the TOP FLOOR range are suitable for use in clean water, without corrosive elements, and offer the maximum possible drainage.

  • Type: TOP 2 FLOOR
  • Pump Type: Open impeller
  • Power Supply: Electric Power
  • Motor Power (Hp): 0.50
  • Power (hp-Watt): 0.50Hp - 370Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Current (A): 2.00
  • Use: Clean water
  • Discharge Outlet Diameter...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

The pumps in the TOP FLOOR range are suitable for use in clean water, without corrosive elements, and offer the maximum possible drainage.

  • Type: TOP 2 FLOOR
  • Pump Type: Open impeller
  • Power Supply: Electric Power
  • Motor Power (Hp): 0.50
  • Power (hp-Watt): 0.50Hp - 370Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Current (A): 2.00
  • Use: Clean water
  • Discharge Outlet Diameter (Inch-mm): 1 1/4"-32mm
  • Max Head (M): 9.00
  • Max Flow Rate (m3/h): 9.60
  • Body Material: Plastic
  • Impeller Material: Plastic (NORYL)
  • Liquid Temperature (°C): 40
  • Solid Passage (Φ mm): 2
  • Maximum Submersion Depth (M): 3
  • Cable Length (M): 5
  • Float: No
  • Net Weight (Kg): 5.2
  • Product Length (cm): 15.20
  • Product Width (cm): 15.20
  • Product Height (cm): 25.70

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
375 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    zorzakos

    Verified purchase

    Immediate delivery.

    Translated from Greek ·
    Did you find this review helpful?

Description & Specifications

The pumps in the TOP FLOOR range are suitable for use in clean water, without corrosive elements, and offer the maximum possible drainage.

  • Type: TOP 2 FLOOR
  • Pump Type: Open impeller
  • Power Supply: Electric Power
  • Motor Power (Hp): 0.50
  • Power (hp-Watt): 0.50Hp - 370Watt
  • Voltage (Volt): 220 Volt/50 Hz
  • Current (A): 2.00
  • Use: Clean water
  • Discharge Outlet Diameter (Inch-mm): 1 1/4"-32mm
  • Max Head (M): 9.00
  • Max Flow Rate (m3/h): 9.60
  • Body Material: Plastic
  • Impeller Material: Plastic (NORYL)
  • Liquid Temperature (°C): 40
  • Solid Passage (Φ mm): 2
  • Maximum Submersion Depth (M): 3
  • Cable Length (M): 5
  • Float: No
  • Net Weight (Kg): 5.2
  • Product Length (cm): 15.20
  • Product Width (cm): 15.20
  • Product Height (cm): 25.70

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
375 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    zorzakos

    Verified purchase

    Immediate delivery.

    Translated from Greek ·
    Did you find this review helpful?