Fine-grained cement mortar of new composition, for smoothing plastered walls, with excellent performance in properties and price. It is used on internal surfaces with its technical characteristics guaranteeing quality and economy in consumption. It belongs to the category of mortars GP, CS I, W1 according to the European standard EN 998-1.

It adheres exceptionally to building surfaces such as exposed concrete, plaster, cement board, marble mortar, etc. It quickly gains mechanical strength and adheres very well even to slightly damp substrates. It is extremely easy to spread and the paste spreads comfortably with a smooth texture, without lumps.

Each successive layer is applied after the previous one has set without causing "lifting" or crumbling. Filling can be done with the GARET POWER paste in a thickness of 1 or 2 millimeters without forming cracks.

INSTRUCTIONS FOR USE:

• Clean the surface thoroughly from any oils, construction dust, or old paints.
• Moisten with water in case of high temperature or when it is windy outdoors.
• Bubbles or peeling should be scraped off and any residues should be removed.
• Cracks or small fissures are repaired with acrylic elastomeric putty or light repair putty GLORIA AFROSTOCK.
• The clean surface is ready for filling without priming.

Application:

• Mix a quantity of GARET POWER with clean water and stir with an electric mixer until a homogeneous paste is formed.
• Wait 2 to 5 minutes and stir a few times before proceeding with the application.
• Apply the mixture with a spatula or plastering tool allowing 2 to 3 hours between layers.
• The putty is sanded after 6 to 12 hours, depending on the temperature and humidity.

Mixing ratio: Each bag of GARET POWER requires 7.5 to 7.6 liters of clean water.