Skroutz.mt

PrimaCreator Value UV / DLP Resin for 3D Printer Black 500ml
3D Printer Resin

PrimaCreator Value UV / DLP Resin for 3D Printer Black 500ml

PrimaCreator Value UV / DLP resin is used in UV-LED and DLP 3D printers to produce objects with fine details and smooth surfaces. It is designed for use at a wavelength of 395–405 nm and cures...

PrimaCreator Value UV / DLP resin is used in UV-LED and DLP 3D printers to produce objects with fine details and smooth surfaces. It is designed for use at a wavelength of 395–405 nm and cures quickly. It has a low odor and limited evaporation.

After printing, objects are rinsed with isopropyl alcohol (IPA) to remove excess resin and require additional...

See full description See full description
13 64 €
Delivery by Wed, 11 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (39)
4.9 (39 reviews)
Greece
20+ pieces
See Printer Supplies on the page of Top Electronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

PrimaCreator Value UV / DLP resin is used in UV-LED and DLP 3D printers to produce objects with fine details and smooth surfaces. It is designed for use at a wavelength of 395–405 nm and cures quickly. It has a low odor and limited evaporation.

After printing, objects are rinsed with isopropyl alcohol (IPA) to remove excess resin and require additional curing in a UV chamber or sunlight. The additional curing time depends on the conditions and ranges from approximately 2–5 minutes in a UV chamber to 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes.

  • Type: UV / DLP resin
  • Compatibility: UV-LED and DLP 3D printers
  • Wavelength: 395–405 nm
  • Color: Black
  • Capacity: 500 ml
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42.0 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage conditions: Protect from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Compatibility
PrimaCreator
Colour
Black
Capacity
500 ml
Resin Type
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PrimaCreator Value UV / DLP resin is used in UV-LED and DLP 3D printers to produce objects with fine details and smooth surfaces. It is designed for use at a wavelength of 395–405 nm and cures quickly. It has a low odor and limited evaporation.

After printing, objects are rinsed with isopropyl alcohol (IPA) to remove excess resin and require additional curing in a UV chamber or sunlight. The additional curing time depends on the conditions and ranges from approximately 2–5 minutes in a UV chamber to 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes.

  • Type: UV / DLP resin
  • Compatibility: UV-LED and DLP 3D printers
  • Wavelength: 395–405 nm
  • Color: Black
  • Capacity: 500 ml
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42.0 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage conditions: Protect from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
Compatibility
PrimaCreator
Colour
Black
Capacity
500 ml
Resin Type
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

13,64 €
14,00 €   shipping cost