Skroutz.mt

Optimum OPTIdrill D 23Pro Pillar Drill with 750W Power
Metalworking Drills

Optimum OPTIdrill D 23Pro Pillar Drill with 750W Power

RPM: 2440rpm , Manufacturer:

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

  • 0.75kW motor with Gates belt: 230V industrial motor with 12 speeds and a durable, high-quality drive belt.
  • Digital rpm and depth display: Built-in display on the housing for instant monitoring of speed and drilling depth.
  • Shaft accuracy < 0.02 mm: Guaranteed concentricity with precision spindle bearings for clean holes.
  • High-quality keyless chuck: Easily clamp drill bits with diameters of 1–16 mm without additional tools.

Industrial Power and Digital Control

Complete demanding tasks in steel up to 25 mm thick with the 0.75 kW industrial motor and durable Gates belt. Choose from 12 speeds ranging from 200 to 2440 rpm, and monitor your settings with precision on the integrated digital depth and speed display, adjusting operation to suit each material.

Ultimate precision and an adjustable table

Achieve exceptional accuracy in every drilling operation with guaranteed runout of less than 0.02 mm and precision bearings. Change drill bits in the 1–16 mm keyless chuck and adjust the 360-degree rotating table to an angle of up to 45° for angled drilling, making use of the diagonal T-slots and coolant channel.

Ergonomic Handling and Safety

Operate the aluminum lever comfortably with soft-grip handles and handle every project with complete confidence. The system features 24V DC electronics, an IP54 switch, a separate emergency stop button, and an adjustable safety guard with a safety switch, so you can always work securely and steadily.

Technical Specifications

  • Model: Optimum OPTIdrill D 23Pro (230 V)
  • Product code: 3003015
  • Motor power: 0.75 kW
  • Supply voltage: 230 V / 50 Hz
  • Drilling capacity in steel (S235JR): 25 mm
  • Continuous drilling capacity in steel (S235JR): 20 mm
  • Speed range: 200–2440 min⁻¹
  • Number of speeds: 12 steps
  • Spindle taper: MT 2
  • Spindle (quill) travel: 80 mm
  • Distance from spindle axis to column: 180 mm
  • Column diameter: Ø 73 mm
  • Spindle runout: < 0.02 mm
  • Worktable dimensions: 280 x 245 mm
  • Table rotation: 360°
  • Table tilt: ± 45°
  • Table T-slot size: 12 mm
  • Maximum distance from spindle to table: 425 mm
  • Maximum distance from spindle to base: 618 mm
  • Base work surface: 240 x 250 mm
  • Base T-slots: 2 x 16 mm (170 mm apart)
  • Dimensions (L x W x H): approx. 680 x 350 x 1015 mm
  • Weight: approx. 58 kg

Package Contents

  • Keyless chuck 1–16 mm
  • Morse taper MK 2 / B16
  • T-nuts

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pillar Drill

Type

Pillar Drill
Fixed bench or floor drill press for vertical, precise holes in metals with comfort and safety.
Power Supply
Electric
Power
750 W

Power

Specifies the power of the machine. More W means easier handling of thicker or harder/more durable materials and greater endurance in demanding tasks, such as with a press brake or a metal furnace.
Threading
No

Threading

Indicates whether the drill has clockwise and counterclockwise operation, so it can cut threads in metal, saving you time.
Rotations
2440 rpm

Rotations

Shows how fast the drill rotates. The correct speed ensures a clean cut and protection.
Gears
12

Gears

Refers to the number of mechanical speeds. More speeds (gearbox) offer flexibility, adjusting the power to the specific metal.

Battery Characteristics

Solo
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • 0.75kW motor with Gates belt: 230V industrial motor with 12 speeds and a durable, high-quality drive belt.
  • Digital rpm and depth display: Built-in display on the housing for instant monitoring of speed and drilling depth.
  • Shaft accuracy < 0.02 mm: Guaranteed concentricity with precision spindle bearings for clean holes.
  • High-quality keyless chuck: Easily clamp drill bits with diameters of 1–16 mm without additional tools.

Industrial Power and Digital Control

Complete demanding tasks in steel up to 25 mm thick with the 0.75 kW industrial motor and durable Gates belt. Choose from 12 speeds ranging from 200 to 2440 rpm, and monitor your settings with precision on the integrated digital depth and speed display, adjusting operation to suit each material.

Ultimate precision and an adjustable table

Achieve exceptional accuracy in every drilling operation with guaranteed runout of less than 0.02 mm and precision bearings. Change drill bits in the 1–16 mm keyless chuck and adjust the 360-degree rotating table to an angle of up to 45° for angled drilling, making use of the diagonal T-slots and coolant channel.

Ergonomic Handling and Safety

Operate the aluminum lever comfortably with soft-grip handles and handle every project with complete confidence. The system features 24V DC electronics, an IP54 switch, a separate emergency stop button, and an adjustable safety guard with a safety switch, so you can always work securely and steadily.

Technical Specifications

  • Model: Optimum OPTIdrill D 23Pro (230 V)
  • Product code: 3003015
  • Motor power: 0.75 kW
  • Supply voltage: 230 V / 50 Hz
  • Drilling capacity in steel (S235JR): 25 mm
  • Continuous drilling capacity in steel (S235JR): 20 mm
  • Speed range: 200–2440 min⁻¹
  • Number of speeds: 12 steps
  • Spindle taper: MT 2
  • Spindle (quill) travel: 80 mm
  • Distance from spindle axis to column: 180 mm
  • Column diameter: Ø 73 mm
  • Spindle runout: < 0.02 mm
  • Worktable dimensions: 280 x 245 mm
  • Table rotation: 360°
  • Table tilt: ± 45°
  • Table T-slot size: 12 mm
  • Maximum distance from spindle to table: 425 mm
  • Maximum distance from spindle to base: 618 mm
  • Base work surface: 240 x 250 mm
  • Base T-slots: 2 x 16 mm (170 mm apart)
  • Dimensions (L x W x H): approx. 680 x 350 x 1015 mm
  • Weight: approx. 58 kg

Package Contents

  • Keyless chuck 1–16 mm
  • Morse taper MK 2 / B16
  • T-nuts

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pillar Drill

Type

Pillar Drill
Fixed bench or floor drill press for vertical, precise holes in metals with comfort and safety.
Power Supply
Electric
Power
750 W

Power

Specifies the power of the machine. More W means easier handling of thicker or harder/more durable materials and greater endurance in demanding tasks, such as with a press brake or a metal furnace.
Threading
No

Threading

Indicates whether the drill has clockwise and counterclockwise operation, so it can cut threads in metal, saving you time.
Rotations
2440 rpm

Rotations

Shows how fast the drill rotates. The correct speed ensures a clean cut and protection.
Gears
12

Gears

Refers to the number of mechanical speeds. More speeds (gearbox) offer flexibility, adjusting the power to the specific metal.

Battery Characteristics

Solo
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.068,88 €
89,00 €   shipping cost