The D-Link DGS-1008P unmanaged switch connects devices to a home or business network through 8 Gigabit Ethernet ports. The 4 PoE ports can power devices such as access points, IP cameras and VoIP phones without requiring a separate power supply for each one. Installation is plug-and-play, while fanless operation helps reduce noise.

This desktop switch uses store-and-forward switching and supports IEEE 802.3x flow control. The ports are located on the rear, and automatically adjust using Auto MDI/MDI-X.

• Type: Unmanaged Layer 2 switch
• Ports: 8 Gigabit Ethernet 10/100/1000 Mbps
• PoE ports: 4, on ports 1–4
• PoE standards: IEEE 802.3af and IEEE 802.3at (PoE+)
• PoE power per port: Up to 30 W
• Total PoE power: 68 W
• Switching capacity: 16 Gbps
• MAC address table: 8,000 entries
• RAM: 256 KB
• Switching method: Store-and-forward
• Packet forwarding rate per port: Ethernet 14,880 pps, Fast Ethernet 148,800 pps, Gigabit Ethernet 1,488,000 pps
• Switching speeds: Ethernet 10 Mbps half-duplex / 20 Mbps full-duplex, Fast Ethernet 100 Mbps half-duplex / 200 Mbps full-duplex, Gigabit Ethernet 2,000 Mbps full-duplex
• Duplex operation: Full/half-duplex for Ethernet, Fast Ethernet and Gigabit Ethernet
• Networking standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, ANSI/IEEE 802.3 NWay auto-negotiation, IEEE 802.3x flow control
• Port adjustment: Auto MDI/MDI-X on all ports
• Compatible cables: 10BASE-T: UTP CAT 3/4/5/5e or EIA/TIA-586 100-ohm STP; 100BASE-TX and 1000BASE-T: UTP CAT 5/5e or EIA/TIA-568 100-ohm STP, with a maximum length of 100 m in each case
• LED indicators: Power and PoE Max on the unit; activity, link, speed, power and status per port
• Installation: Plug-and-play
• Design: Desktop, fanless, with rear-facing ports
• Dimensions: 190 × 120 × 38 mm
• Power supply: External, 53.5 V / 1.5 A
• Operating temperature: 0 to 40 °C
• Storage temperature: -40 to 70 °C
• Operating humidity: 0% to 95% RH, non-condensing
• Certifications and compliance: CE, RoHS, NDAA