Skroutz.mt

Blam S 165.80+ Coaxial Car Speakers Set 6.5 Inch with 60W RMS Woofer
Car Speakers

Blam S 165.80+ Coaxial Car Speakers Set 6.5 Inch with 60W RMS Woofer

2 WAY COMPONENT SPEAKERS Sound System

  • Two 165 mm (6.5”) woofer speakers
  • Two 20 mm (3/4’’) high-resolution tweeters
  • Four external crossovers

WS 6.80 HIGH SENSITIVITY WOOFER

  • 6.5” (165 mm) woofer
  • ...

2 WAY COMPONENT SPEAKERS Sound System

  • Two 165 mm (6.5”) woofer speakers
  • Two 20 mm (3/4’’) high-resolution tweeters
  • Four external crossovers

WS 6.80 HIGH SENSITIVITY WOOFER

  • 6.5” (165 mm) woofer
  • Maximum power 120 W / Nominal power 60 W
  • Frequency range 60 Hz – 7 kHz
  • Sensitivity 94.3 dB
  • Impedance 2 Ω
  • Cast aluminum basket
  • Ultra rigid carbon fiber polycarbonate...
See full description See full description

  • RMS Power

    The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.

  • Resistance

     The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

  • Maximum Power

    The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

2 WAY COMPONENT SPEAKERS Sound System

  • Two 165 mm (6.5”) woofer speakers
  • Two 20 mm (3/4’’) high-resolution tweeters
  • Four external crossovers

WS 6.80 HIGH SENSITIVITY WOOFER

  • 6.5” (165 mm) woofer
  • Maximum power 120 W / Nominal power 60 W
  • Frequency range 60 Hz – 7 kHz
  • Sensitivity 94.3 dB
  • Impedance 2 Ω
  • Cast aluminum basket
  • Ultra rigid carbon fiber polycarbonate diaphragm
  • IIR surround
  • Long-lasting "conex" spider
  • 28 mm voice coil, fiberglass reinforcement
  • 80 x 17 mm magnetic motor
  • Gold terminals

TS 20 HR HIGH RESOLUTION TWEETER

  • 20 mm (3/4’’) fabric dome diaphragm
  • Frequency range 2.5 KHz – 43 kHz
  • Sensitivity (2.83 V / 1m) 88.3 dB
  • Impedance 5 Ω
  • Compact mounting dimensions
  • High-efficiency magnet (N38H neodymium)
  • Ferrofluid for high power handling

BFT01 HIGH QUALITY CROSSOVER

  • 12 dB/octave high-pass crossover
  • Adjustable tweeter level at +3 dB, 0 dB, or -3 dB

BFW01 HIGH QUALITY CROSSOVER

  • 6 dB/octave low-pass crossover

MORE INFORMATION

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Woofer

Type

Woofer

Speakers designed primarily to reproduce low frequencies (bass). They are usually chosen as part of a setup that includes separate tweeter and midrange speakers. For more bass, it is recommended to also install a subwoofer.
Shape
Round
Round Speakers Diameter
6.5 "

Technical Specifications

Peak Power
120 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
60 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
2 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

2 WAY COMPONENT SPEAKERS Sound System

  • Two 165 mm (6.5”) woofer speakers
  • Two 20 mm (3/4’’) high-resolution tweeters
  • Four external crossovers

WS 6.80 HIGH SENSITIVITY WOOFER

  • 6.5” (165 mm) woofer
  • Maximum power 120 W / Nominal power 60 W
  • Frequency range 60 Hz – 7 kHz
  • Sensitivity 94.3 dB
  • Impedance 2 Ω
  • Cast aluminum basket
  • Ultra rigid carbon fiber polycarbonate diaphragm
  • IIR surround
  • Long-lasting "conex" spider
  • 28 mm voice coil, fiberglass reinforcement
  • 80 x 17 mm magnetic motor
  • Gold terminals

TS 20 HR HIGH RESOLUTION TWEETER

  • 20 mm (3/4’’) fabric dome diaphragm
  • Frequency range 2.5 KHz – 43 kHz
  • Sensitivity (2.83 V / 1m) 88.3 dB
  • Impedance 5 Ω
  • Compact mounting dimensions
  • High-efficiency magnet (N38H neodymium)
  • Ferrofluid for high power handling

BFT01 HIGH QUALITY CROSSOVER

  • 12 dB/octave high-pass crossover
  • Adjustable tweeter level at +3 dB, 0 dB, or -3 dB

BFW01 HIGH QUALITY CROSSOVER

  • 6 dB/octave low-pass crossover

MORE INFORMATION

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Woofer

Type

Woofer

Speakers designed primarily to reproduce low frequencies (bass). They are usually chosen as part of a setup that includes separate tweeter and midrange speakers. For more bass, it is recommended to also install a subwoofer.
Shape
Round
Round Speakers Diameter
6.5 "

Technical Specifications

Peak Power
120 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
60 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
2 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.