Vitex Cimentol acrylic concrete paint is designed for exterior concrete surfaces and can be applied directly to cement without a primer. It gives a satin finish and withstands adverse weather conditions and air pollution. It is suitable for walls, exposed concrete, concrete columns, cement screeds, floors subject to moderate wear, garages, tennis courts and roof tiles.
Surfaces must be clean, dry and smooth. New cement surfaces must be allowed to dry completely for at least 30 days before application. Thin the paint by up to 5% with T-300 brush thinner for application by roller or brush, or with T-350 for spray application. Apply a second coat after 6–8 hours.
- Type: Concrete paint
- Composition: Acrylic, solvent-based
- Colour: Anthracite
- Volume: 750 ml
- Gloss level: Satin
- Use: Exterior concrete surfaces
- Application: By roller, brush, spray gun or airless sprayer
- Priming: Not required on suitable surfaces; highly absorbent or friable surfaces should be primed with Durovit
- Thinning: Up to 5%
- Touch dry: 20–40 minutes
- Recoating: 6–8 hours
- Coverage per coat: 10–12 m²/lt
- Coverage for two coats: 5–6 m²/lt
- Application temperature: 5–35 °C
- Relative humidity for application: Below 70%
- Application conditions: Apply outdoors or in a well-ventilated area, with no risk of rain or frost in the next 48 hours
- Tool cleaning: Clean rollers and brushes with T-300, then with soap or detergent; clean spray guns with T-350
- Volatile organic compounds: Up to 428 g/lt, ready to use
- Storage: 5–38 °C, in closed containers and a shaded place
Specifications
- Type
- Concrete Paint
- Colour
- Grey
- Acrilyc
- Yes
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.