- Input power: DC 10 - 20V
- Circuit power: Max. 80W
- Charging current range: 0.1 ~ 6.0A
- Current drain for Li-po balancing: 300mAh / cell
- Number of NiCd / NiMh battery cells: 1 ~ 15 cells
- Number of lithium-ion / polymer cells: 1 ~ 6 series
- Pb battery voltage: 2v to 20v
- Weight: 350g
This charger has a very wide application: screwdrivers, electric wheels, electric scooters, radio-controlled cars, airplanes, helicopters, drones, as well as batteries for laptops, tablets, phones, and UPS. It is also suitable for car and motorcycle batteries.
It is also suitable for restoring old or completely depleted batteries.
Battery types that can be charged with this charger: Lipo / Li-ion / LiFe / NiMh / NiCad / Pb / Lead Acid.
*This charger operates on a 10-20 volt power supply. If you want to use it with 220 volts, you will need a 12-volt adapter.
**The 220 V power supply is NOT included in the set. It can be purchased separately from "here"
Technical Specifications:
- Input power: DC 10 - 20V
- Circuit power: Max. 80W
- Charging current range: 0.1 ~ 6.0A
- Current drain for Li-po balancing: 300mAh / cell
- Number of NiCd / NiMh battery cells: 1 ~ 15 cells
- Number of lithium-ion / polymer cells: 1 ~ 6 series
- Pb battery voltage: 2v to 20v
- Weight: 350g
- Type
- Balance
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.