Skroutz.mt

Milwaukee M18 FRAD2-0 Angle Drill Driver Battery Solo Brushless 18V
Power Drill Drivers & Screwdrivers

Milwaukee M18 FRAD2-0 Angle Drill Driver Battery Solo Brushless 18V

The Milwaukee M18 FRAD2-0 is a FUEL series cordless right-angle drill/driver, suitable for drilling and driving screws in confined spaces. The POWERSTATE brushless motor maintains its performance...

The Milwaukee M18 FRAD2-0 is a FUEL series cordless right-angle drill/driver, suitable for drilling and driving screws in confined spaces. The POWERSTATE brushless motor maintains its performance under load, while REDLINK electronics protect the tool and battery from overloading. The mechanical clutch protects the tool in the event of a jam.

The metal chuck...

See full description See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.

  • Number of Batteries

    0

    Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.
  • See all
540 70 €
Delivery Wed, 04 Nov - Fri, 06 Nov
23,00 €   shipping cost
Sent from Greece
From Kolleris
Greece
2 pieces
See Power Tools on the page of Kolleris

Learn more about invoicing
Review the product
Product report

Description

Description

The Milwaukee M18 FRAD2-0 is a FUEL series cordless right-angle drill/driver, suitable for drilling and driving screws in confined spaces. The POWERSTATE brushless motor maintains its performance under load, while REDLINK electronics protect the tool and battery from overloading. The mechanical clutch protects the tool in the event of a jam.

The metal chuck accepts a chuck key, while the LED work light and built-in battery fuel gauge provide visibility and show the remaining charge. The tool is compatible with MILWAUKEE M18 batteries and is supplied as a bare tool.

  • Type: Right-angle drill/driver
  • Power supply: Battery
  • Voltage: 18 V
  • Batteries: Battery and charger not included; compatible with MILWAUKEE M18 Li-ion batteries
  • Motor: POWERSTATE brushless
  • Maximum torque: 122 Nm
  • Speeds: 2, with ranges of 0–500 rpm and 0–1,500 rpm
  • Maximum speed: 1,500 rpm
  • Chuck / Holder: 13 mm keyed metal chuck
  • Drilling capacity: Up to 152 mm in wood and 13 mm in steel
  • Work light: LED
  • Weight: 6.4 kg without battery
  • Package contents: Chuck key and side handle

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Compatible Battery Type
-

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Wood Ø
152 mm

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
122 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
with key
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
6400 gr
Weight (with Battery)
6400 gr

Extra Features

Carrying Case
Without
Handle Included
No
Integrated Light
No
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Milwaukee M18 FRAD2-0 is a FUEL series cordless right-angle drill/driver, suitable for drilling and driving screws in confined spaces. The POWERSTATE brushless motor maintains its performance under load, while REDLINK electronics protect the tool and battery from overloading. The mechanical clutch protects the tool in the event of a jam.

The metal chuck accepts a chuck key, while the LED work light and built-in battery fuel gauge provide visibility and show the remaining charge. The tool is compatible with MILWAUKEE M18 batteries and is supplied as a bare tool.

  • Type: Right-angle drill/driver
  • Power supply: Battery
  • Voltage: 18 V
  • Batteries: Battery and charger not included; compatible with MILWAUKEE M18 Li-ion batteries
  • Motor: POWERSTATE brushless
  • Maximum torque: 122 Nm
  • Speeds: 2, with ranges of 0–500 rpm and 0–1,500 rpm
  • Maximum speed: 1,500 rpm
  • Chuck / Holder: 13 mm keyed metal chuck
  • Drilling capacity: Up to 152 mm in wood and 13 mm in steel
  • Work light: LED
  • Weight: 6.4 kg without battery
  • Package contents: Chuck key and side handle

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Compatible Battery Type
-

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Wood Ø
152 mm

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
122 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
with key
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
6400 gr
Weight (with Battery)
6400 gr

Extra Features

Carrying Case
Without
Handle Included
No
Integrated Light
No
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

540,70 €
23,00 €   shipping cost