Skroutz.mt

D-Link DAP-X2810 v1 Wi‑Fi 6 Dual Band (2.4 & 5GHz) Access Point Single Kit
Access Points

D-Link DAP-X2810 v1 Wi‑Fi 6 Dual Band (2.4 & 5GHz) Access Point Single Kit

The D-Link DAP-X2810 access point supports dual-band Wi-Fi 6 and offers a maximum WLAN speed of 1,200 Mbps, with 575 Mbps on 2.4 GHz and 1,200 Mbps on 5 GHz. 2x2 MU-MIMO technology, beamforming and...

The D-Link DAP-X2810 access point supports dual-band Wi-Fi 6 and offers a maximum WLAN speed of 1,200 Mbps, with 575 Mbps on 2.4 GHz and 1,200 Mbps on 5 GHz. 2x2 MU-MIMO technology, beamforming and Airtime Fairness help manage traffic and connected devices. It supports Access Point, wireless client and WDS modes, and is managed through the Nuclias Connect...

See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
135 70 €
Delivery Mon, 23 Nov - Fri, 27 Nov
14,00 €   shipping cost
Sent from Greece
From Best-offer 4.9 (103)
4.9 (103 reviews)
Greece
20+ pieces
See Networking on the page of Best-offer

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The D-Link DAP-X2810 access point supports dual-band Wi-Fi 6 and offers a maximum WLAN speed of 1,200 Mbps, with 575 Mbps on 2.4 GHz and 1,200 Mbps on 5 GHz. 2x2 MU-MIMO technology, beamforming and Airtime Fairness help manage traffic and connected devices. It supports Access Point, wireless client and WDS modes, and is managed through the Nuclias Connect platform.

802.3at PoE makes installation easier without the need for an additional power cable. It supports captive portal configuration, up to 16 SSIDs, and WPA3, WPA2 and WEP security protocols. It also features load balancing, automatic channel selection and Wi-Fi scheduling.

  • Maximum WLAN speed: 1,200 Mbps
  • 2.4 GHz speed: 575 Mbps
  • 5 GHz speed: 1,200 Mbps
  • Wi-Fi generation: Wi-Fi 6
  • Frequency: Dual-band 2.4 and 5 GHz
  • Wi-Fi standards: IEEE 802.11a, 802.11b/g/n, 802.11ac, 802.11ax
  • Ethernet ports: 1 Gigabit Ethernet RJ-45 port
  • LAN speed: 10/100/1000 Mbps
  • PoE power: 802.3at
  • Antenna gain: 4.3 dBi
  • Antennas: 2 internal
  • MIMO technology: 2x2 MU-MIMO
  • Security: 64/128-bit WEP, WPA, WPA2 and WPA3
  • Maximum number of SSIDs: 16
  • Management: Nuclias Connect, Web, SNMP, CLI, Telnet, SSH and Syslog
  • Mounting: Indoor, on a surface, ceiling or wall
  • Color: White
  • Power supply voltage: 12 V
  • Input current: 2.5 A
  • Maximum power consumption: 19.44 W
  • LED indicators: Power and status
  • Dimensions: 170 x 170 x 28 mm
  • Weight: 477.4 g
  • Operating temperature: 0 to 40 °C
  • Operating humidity: 10–90%
  • Storage temperature: -20 to 65 °C
  • Storage humidity: 5–95%
  • Certifications: FCC, CE

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1200 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
4.3 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The D-Link DAP-X2810 access point supports dual-band Wi-Fi 6 and offers a maximum WLAN speed of 1,200 Mbps, with 575 Mbps on 2.4 GHz and 1,200 Mbps on 5 GHz. 2x2 MU-MIMO technology, beamforming and Airtime Fairness help manage traffic and connected devices. It supports Access Point, wireless client and WDS modes, and is managed through the Nuclias Connect platform.

802.3at PoE makes installation easier without the need for an additional power cable. It supports captive portal configuration, up to 16 SSIDs, and WPA3, WPA2 and WEP security protocols. It also features load balancing, automatic channel selection and Wi-Fi scheduling.

  • Maximum WLAN speed: 1,200 Mbps
  • 2.4 GHz speed: 575 Mbps
  • 5 GHz speed: 1,200 Mbps
  • Wi-Fi generation: Wi-Fi 6
  • Frequency: Dual-band 2.4 and 5 GHz
  • Wi-Fi standards: IEEE 802.11a, 802.11b/g/n, 802.11ac, 802.11ax
  • Ethernet ports: 1 Gigabit Ethernet RJ-45 port
  • LAN speed: 10/100/1000 Mbps
  • PoE power: 802.3at
  • Antenna gain: 4.3 dBi
  • Antennas: 2 internal
  • MIMO technology: 2x2 MU-MIMO
  • Security: 64/128-bit WEP, WPA, WPA2 and WPA3
  • Maximum number of SSIDs: 16
  • Management: Nuclias Connect, Web, SNMP, CLI, Telnet, SSH and Syslog
  • Mounting: Indoor, on a surface, ceiling or wall
  • Color: White
  • Power supply voltage: 12 V
  • Input current: 2.5 A
  • Maximum power consumption: 19.44 W
  • LED indicators: Power and status
  • Dimensions: 170 x 170 x 28 mm
  • Weight: 477.4 g
  • Operating temperature: 0 to 40 °C
  • Operating humidity: 10–90%
  • Storage temperature: -20 to 65 °C
  • Storage humidity: 5–95%
  • Certifications: FCC, CE

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1200 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
4.3 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

135,70 €
14,00 €   shipping cost