Vitex Cimentol acrylic concrete paint is a solvent-based paint for exterior cement and concrete surfaces, such as walls, concrete floors subject to moderate wear, garages, tennis courts and roof tiles. It can be applied directly to cement without a primer and leaves a satin finish. It withstands harsh weather conditions and air pollution, while offering strong adhesion, high coverage and hardness.
Surfaces must be clean, dry and smooth, free of dust, oil or loose material. Highly absorbent or friable surfaces should be primed with Durovit. New concrete surfaces must be left to dry completely for at least 30 days before application.
- Type: Solvent-based acrylic concrete paint
- Use: Exterior cement and concrete surfaces
- Colour: Lead grey
- Gloss level: Satin
- Volume: 750 ml
- Application: Directly onto cement without a primer
- Thinning: Up to 5% with T-300 for roller or brush application, and T-350 for spray-gun application
- Application tools: Roller, brush or airless system
- Recoating time: 6–8 hours
- Touch-dry time: 20–40 minutes
- Coverage for one coat: 10–12 m²/lt
- Coverage for two coats: 5–6 m²/lt
- Application conditions: 5–35 °C and relative humidity below 70%
- Tool cleaning: T-300, followed by soap or detergent for rollers and brushes; T-350 for spray guns
- Volatile organic compounds: Up to 428 g/lt when ready to use
- Storage: In a sealed container, in a shaded place, at 5–38 °C
Specifications
- Type
- Concrete Paint
- Colour
- Grey
- Acrilyc
- Yes
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.