Excellent and with very good functions, automations from the app.
For me, on an oil burner with an electric valve, the following wiring worked correctly:
In summary for your records:
• Brown (Phase) -> Terminal 4
• Blue (Neutral) -> Terminal 3
• Yellow-green (Command) -> Terminal 6
• Bridge (Small wire) -> Between 4 and 5

Before, when I had the command on 2, the thermostat would turn off when it reached temperature.

I have it at my country house and I turn on the radiator before I leave, and by the time I arrive it has reached temperature and the house is warm.
During the Easter holidays I had it on the 5+2 automatic program with the night at 19.5 (19 - 20) and the morning at 18 (17.5 - 18.5) and I can say that the burner was economical.

Does its job without losses, easy wifi connection, without major deviations, personally I was not able to program it, also what I would like it to have and it doesn't, is that in order to see how many hours it operates you have to pay a subscription in the app, otherwise very good for its price and easy installation!

Useless, the temperature sensor is bad, it deviates from the actual temperature, and they have also set it to round up every half degree, resulting in the difference increasing even more. As if that wasn't enough, after it gives the command to turn on the heating, as soon as the room starts to warm up, the deviation increases even more, it measures 1.5 - 2 degrees higher than it actually is, causing it to turn off early, faster, before the room reaches the desired temperature.
I have set it to give the command when there is a 0.5 difference and I have tried to adjust the deviation, but it doesn't just have a bad sensor with a small deviation, it has two other problems...

Easy to install, it just has a small difference in recognizing the actual temperature, it is off by about one degree

I didn't expect it...excellent..doesn't lose wifi, very easy..the thermostat is very good..worth it..I installed it in a boiler system

Easy installation, temperature indication without significant deviation, stable Wifi connection, reasonable price.

good, easy, cheap but every time you enter the app it asks for location, you cancel and then you select temperature!

It seems very good and MAYBE it does what it promises, but the wiring diagram is incomplete. Unfortunately, I burned the WiFi because of this.

Very good product.
Accuracy in measurements and easy to connect.
It does exactly what it promises.
It has been connected to a pellet burner.

Good morning, does anyone know if when you change the temperature from the mobile, the thermostat screen also turns on?

Simple, precise, easy to set up. I have had it for several years and it works perfectly. The app offers many fine adjustments, such as when to turn on and off, and it even has a +/-0.5 degree setting

I have had it for 2 years, absolutely satisfied. Beautiful, functional, and the mobile app helps a lot, I never had a disconnection to say that I couldn’t use it, you can see from afar how many degrees you have in your space and act accordingly, you turn it on and off... also very easy and complete programming of operation with intermediate hours and temperatures during the day, weekly with a different program if you want for the weekend. Perfect.

Accurate in temperature measurements and easy connection to wifi. The app is very user-friendly and responsive.

Hey guys, why is it that even though we connected everything properly with the app and all, it kept shutting down the boiler? It would start to run the boiler and then stop immediately.

Very good thermostat with accurate temperature control and many functions to make your daily life easier! I have had it for about a month and a half and I am absolutely satisfied!

I also want to mention some comments that say the thermostat's temperature is not properly aligned with the actual temperature. Through the app's settings, there are options to make various adjustments such as temperature calibration. Initially, I have a device that shows me the temperature inside the house and based on that I set the thermostat. So, based on both, I set the thermostat from its app to -2 so it shows the real temperature. Also, the fact that it turns on when the temperature drops by half a degree does not bother me personally, because you can't really notice half a degree difference in a warm house

command in phase 2 and neutral N

Nice thermostat, user-friendly and easy to install! The installation was easy (phase-neutral normally and the command to 2)

Excellent thermostat. For its price, it's the best. Endless customization and very easy connection. If you install it on a treadmill, set the temp calibration to 0 and the int. deadzone to 0.5

I've had it for two years. It works perfectly. I installed it myself. I've never had a problem. When you install it, take notes; you'll need them for every change you make to the WiFi code. It saves 50% on oil if you program it to turn on and off with your own commands (kind of like a timer) without getting cold. This is done once a day. It's an amazing device.

It is generally worth it at this price. It offers great convenience, especially if you connect it to the internet, as the control is done through the app.

Very good, easy connection with the app and WiFi. It does not disconnect as I have read in various comments.

Easy installation, along with a 86x86 box to look nice. Wires in 2 the command, 3 the neutral and 4 the phase in my case. Direct connection to Smart Life app for remote control and scheduling

I had a battery thermostat which had two wires, black and blue, and was connected to the boiler. For the new thermostat, I pulled a new line to provide power to 3 and 4, and the two existing wires that were connected to the burner and give commands, I connected to 5 and 6. 4 stars because the calibration is done every 1 degree while it would be more convenient at 0.5. The service from TechnoLysis is helpful.

In less than a year it broke, and from where I bought it they suggested I buy a new one.. This is the kind of after sales we're talking about. Just STAY AWAY!

Very good product, does what it promises. The connection was made phase (brown wire) to L(4) neutral (blue wire) to N(3) bridge from 4 to 5 and the command (in my case green-yellow wire) to 6.

5 stars so far. It's been a year since I installed it and it has no problems. Convenient control with the mobile. It fits normally in a switch box, just choose a deep switch box and not the regular ones, it will fit better.

It works perfectly. Almost 2 years of operation. I control it from its app and also from Google Home

For the money, the thermostat is very good. It does what it promises, programming is easy through the app, no disconnections, it requires connection to the router, a temperature calibration and you're ready!

Easy installation. In position 3 neutral, in position 4 current, in position 2 the command to the boiler which, when activated, has current, no need for a bridge from L. Note that from the application you can now adjust the temperature by 0.5 C. It is not true what has been written before that it is adjusted by 1 degree C.