Skroutz.mt

Kyoritsu Digital Clamp Meter 600A AC 2037 True RMS
Clamp Meters

Kyoritsu Digital Clamp Meter 600A AC 2037 True RMS

The Kyoritsu 2037 clamp meter measures AC and DC current, as well as AC and DC voltage. AC current and voltage measurements use True RMS, while the digital display shows the measured values.

It...

The Kyoritsu 2037 clamp meter measures AC and DC current, as well as AC and DC voltage. AC current and voltage measurements use True RMS, while the digital display shows the measured values.

It measures resistance and frequency. The continuity buzzer sounds at a resistance below 20 20 Ω. The maximum conductor size is Ø33 mm, and the device is powered by one...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Kyoritsu 2037 clamp meter measures AC and DC current, as well as AC and DC voltage. AC current and voltage measurements use True RMS, while the digital display shows the measured values.

It measures resistance and frequency. The continuity buzzer sounds at a resistance below 20 ± 20 Ω. The maximum conductor size is Ø33 mm, and the device is powered by one 9 V 6F22 battery.

  • AC current: 0.1–600 A
  • DC current: 0.1–1000 A
  • AC voltage: 40/400/600 V
  • DC voltage: 40/400/600 V
  • Resistance: 400/4000 Ω
  • Frequency: up to 3000 Hz
  • Frequency response: 10 Hz–1 kHz
  • Display: Digital
  • True RMS: Yes
  • Test leads: Included
  • Maximum conductor size: Ø33 mm
  • Safety standard: IEC 61010-1
  • Withstand voltage: 5550 V AC for 1 minute
  • Power supply: 1 × 9 V 6F22 battery

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

with Test Leads
Yes

with Test Leads


It has measurement terminals that have a red wire for positive and a black wire for negative.
AC Current
600 A
Indication
Digital
Bluetooth
No
ISO/NIST Calibration Certificate
No

Features & Functions

Inrush Current
-

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
Yes

True RMS


The True-RMS method will provide the correct value of the alternating quantity regardless of its waveform.
NCV
No
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
-

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
-

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

474,00 €
14,00 €   shipping cost