Primers

Berling Quartz Tile Primer 10kg

Berling Quartz Tile quartz acrylic primer is water-based, single-component and ready to use. It is intended for smooth, non-absorbent surfaces, where it creates a rough substrate for applying coatings...

Berling Quartz Tile quartz acrylic primer is water-based, single-component and ready to use. It is intended for smooth, non-absorbent surfaces, where it creates a rough substrate for applying coatings such as Deco Cire microcement.

It can be applied to tiles, wood, concrete, plasterboard, cement boards, galvanized surfaces, aluminium, glass and previously...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.

Description & Specifications

Berling Quartz Tile quartz acrylic primer is water-based, single-component and ready to use. It is intended for smooth, non-absorbent surfaces, where it creates a rough substrate for applying coatings such as Deco Cire microcement.

It can be applied to tiles, wood, concrete, plasterboard, cement boards, galvanized surfaces, aluminium, glass and previously painted surfaces. It has a very low content of organic solvents, is almost odourless and is resistant to alkaline substrates. Its enhanced hydrophobicity protects against moisture ingress, while it can also adhere to surfaces with moisture levels above the usual threshold (>4%).

The surface must be dry and free from oil, grease and loose material. Do not dilute the primer. Stir well before use and periodically during application with a brush or roller. If a second coat is required, apply it after 6 hours. It is touch-dry in 1–2 hours, while full-depth drying takes at least 24 hours. Apply Deco Cire or another coating after 24–48 hours. The Quartz Tiles – Deco Cire system reaches its full strength after 7 days and is intended for walls and floors subject to moderate wear.

  • Type: Bonding primer
  • Properties: Quartz-based, acrylic and water-based
  • Application surfaces: Smooth, non-absorbent surfaces, tiles, wood, concrete, plasterboard, cement boards, galvanized surfaces, aluminium, glass and previously painted surfaces
  • Use: Interior surfaces
  • Components: Single-component
  • Dilution: Do not dilute
  • Application: With a brush or roller
  • Time before second coat: After 6 hours
  • Time before applying coating: After 24–48 hours
  • Coverage: 200–250 g/m², depending on the surface and application method
  • Touch-dry: 1–2 hours
  • Full-depth drying: At least 24 hours
  • Density: 1.27 ± 0.03 g/cm³
  • VOC content: Up to 28 g/l
  • Colour: Grey
  • Weight: 10 kg

Manufacturer

Specifications

Genre
Primer
Surfaces
Internal
Properties
Quartz

Quantity

Weight
10 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.