Skroutz.mt

Tattu UAV Classic Li-Po Battery 3.7V 600mAh 30C 1S for RC Vehicle
Batteries for Drones & RC Vehicles

Tattu UAV Classic Li-Po Battery 3.7V 600mAh 30C 1S for RC Vehicle

Voltage: 3.7 V

Capacity: 600 mAh

Number of cells: 1

Connector type: Molex

Balancer: Molex / JST-XHR

Discharge current (continuous): 30C

Dimensions:

  • Length: 60 mm
  • Width: 19 mm
  • Height: 7 mm

Weight:...

Voltage: 3.7 V

Capacity: 600 mAh

Number of cells: 1

Connector type: Molex

Balancer: Molex / JST-XHR

Discharge current (continuous): 30C

Dimensions:

  • Length: 60 mm
  • Width: 19 mm
  • Height: 7 mm

Weight: 15.7 g

Tattu batteries are specially designed for the demands of UAVs, offering excellent power for various applications, whether recreational or commercial.

...

See full description See full description
  • Voltage 3.7 V
  • Capacity 600 mAh

  • Cells

    The individual elements (cells) that are connected in series to provide the desired voltage (Volt). For example, a "3S" battery contains 3 connected Lithium cells inside. More cells mean higher voltage and usually greater power.

  • Discharge Rate

    The discharge rate, also known as the C-Rating, indicates how quickly the battery can safely deliver its current without overheating or swelling. The values you see refer to continuous discharge, that is, the maximum current the battery can provide steadily and safely throughout its operation without overheating. There is also burst discharge, which is the maximum "burst" of current the battery can withstand for a few seconds (usually 3-5s) to cover sudden accelerations.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Voltage: 3.7 V

Capacity: 600 mAh

Number of cells: 1

Connector type: Molex

Balancer: Molex / JST-XHR

Discharge current (continuous): 30C

Dimensions:

  • Length: 60 mm
  • Width: 19 mm
  • Height: 7 mm

Weight: 15.7 g

Tattu batteries are specially designed for the demands of UAVs, offering excellent power for various applications, whether recreational or commercial.

Safety instructions:

  • Do not discharge below 3.0 V per cell.
  • Charge only using a microprocessor charger in the lithium polymer charging mode.
  • Do not short-circuit the terminals.
  • Do not puncture.
  • Do not expose to direct sunlight.
  • Store away from flammable materials.
  • Dispose of in specially prepared containers.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Battery Type
Li-Po

Battery Type

Li-Po
They offer more charging cycles like Li-ion batteries, with the difference that they are lighter and have less risk of leakage, but lower capacity.
Application
RC Vehicle
Capacity
600 mAh
Voltage
3.7 V
Number of Cells
1S

Number of Cells

The individual elements (cells) that are connected in series to provide the desired voltage (Volt). For example, a "3S" battery contains 3 connected Lithium cells inside. More cells mean higher voltage and usually greater power.
Plug Type
-
Discharge Rate
30C

Discharge Rate

The discharge rate, also known as the C-Rating, indicates how quickly the battery can safely deliver its current without overheating or swelling. The values you see refer to continuous discharge, that is, the maximum current the battery can provide steadily and safely throughout its operation without overheating. There is also burst discharge, which is the maximum "burst" of current the battery can withstand for a few seconds (usually 3-5s) to cover sudden accelerations.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (6)

Reviews

4.0
6
4.0
Review this product
  1. 4
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1
Review this product

Description & Specifications

Voltage: 3.7 V

Capacity: 600 mAh

Number of cells: 1

Connector type: Molex

Balancer: Molex / JST-XHR

Discharge current (continuous): 30C

Dimensions:

  • Length: 60 mm
  • Width: 19 mm
  • Height: 7 mm

Weight: 15.7 g

Tattu batteries are specially designed for the demands of UAVs, offering excellent power for various applications, whether recreational or commercial.

Safety instructions:

  • Do not discharge below 3.0 V per cell.
  • Charge only using a microprocessor charger in the lithium polymer charging mode.
  • Do not short-circuit the terminals.
  • Do not puncture.
  • Do not expose to direct sunlight.
  • Store away from flammable materials.
  • Dispose of in specially prepared containers.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Battery Type
Li-Po

Battery Type

Li-Po
They offer more charging cycles like Li-ion batteries, with the difference that they are lighter and have less risk of leakage, but lower capacity.
Application
RC Vehicle
Capacity
600 mAh
Voltage
3.7 V
Number of Cells
1S

Number of Cells

The individual elements (cells) that are connected in series to provide the desired voltage (Volt). For example, a "3S" battery contains 3 connected Lithium cells inside. More cells mean higher voltage and usually greater power.
Plug Type
-
Discharge Rate
30C

Discharge Rate

The discharge rate, also known as the C-Rating, indicates how quickly the battery can safely deliver its current without overheating or swelling. The values you see refer to continuous discharge, that is, the maximum current the battery can provide steadily and safely throughout its operation without overheating. There is also burst discharge, which is the maximum "burst" of current the battery can withstand for a few seconds (usually 3-5s) to cover sudden accelerations.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (6)

4.0
6
4.0
Review this product
  1. 4
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1
Review this product