Novamix Planofinish PU 2KW surface varnish is a clear, matte, two-component, water-dilutable polyurethane varnish. Apply at least two consecutive coats using a suitable varnish roller, allowing 15–30 minutes between coats at 23°C. It protects against dirt, water and oily contaminants without altering the color of the polished cement coating.
Suitable for polished cement coatings, epoxy coatings and floor paints, Karystos stone, split-face stone, industrial concrete floors, and non-absorbent surfaces such as galvanized sheet metal and polyester. It can be used in combination with PLANOFINISH EPOXY and DRY BRIGHT varnishes for applications requiring enhanced protection.
- Type: Surface varnish
- Surface material: Stone
- Composition: Polyurethane, aliphatic
- Components: 2
- Thinning: Water
- Color: Clear
- Gloss level: Matte
- Quantity: 1 lt
- Coverage: 100–150 ml/m²
- Form: Liquid
- Coats required: At least 2
- Recoat time: 15–30 minutes at 23°C
- Pot life: 1 hour above 30°C, 2 hours above 25°C, 2.5 hours above 12°C
- Walk-on time: 30 minutes above 25°C, 2–3 hours above 12°C
- Abrasion resistance: 48 mg Taber test ASTM D 4060 (CS 10/1000/1000)
- Adhesion: ≥ 2.4 N/mm²
- Application temperature: From +12°C to +30°C
- Surface conditions: Clean, dry and dust-free
- Maximum surface moisture: 4%
- Type
- Surface Varnish
- Surface Material
- Stone
- Glossiness
- Matte
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- Yes
- 2-Component
- Yes
- Quantity
- 1 lt
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.