Teak oil known for its maritime applications. The special oil composition has excellent penetration, filling the wood's pores. 

It increases the lifespan of wooden surfaces by replacing the wood's natural oils that are lost over time and due to exposure to harsh conditions of intense sunlight and difficult weather conditions. It does not create a film, is colorless, offering an excellent finish and highlighting the natural beauty of the wood.

Characteristics:

• The most effective and friendly protection for hardwoods
• Excellent penetration
• Prevents cracking and peeling of the wood
• Prevents staining and graying of the wood
• Restores the original appearance of the wood
• Ensures the longevity of hardwoods
• Easy application

Applications:

• Maritime applications such as on wooden decks and any wooden construction of ships and yachts.
• Maintenance of garden and terrace furniture that has faded due to use or weather conditions.
• Maintenance of non-varnished indoor furniture that has faded due to central heating and dry atmosphere.
• Finishing of any new wooden construction where a natural look is desired, avoiding varnish.

Surface Preparation:

• Woods sold for construction are usually treated with special preservatives to prevent infestation by organisms and decay.
• Surfaces must be dry and clean from contaminants, mud, mold, algae, and residues of other materials.
• For best results, clean the surface with a brush and then with a special wood cleaner to restore the wood's natural color.
• Rinse the surface with plenty of water and let it dry.
• Sand the surface with fine sandpaper if necessary and remove the dust.
• If surfaces have old varnishes or varnish paints, they must be removed with D-26 stripper.
• To avoid staining, it is recommended to cover the floor with nylon.

Application:

• Shake the spray very well before use.
• Hold the container upright and spray evenly on the surface from a distance of 25 - 30 cm. Apply up and down and left to right. After 15 minutes, remove the excess material with a cloth.
• For softwoods or woods exposed to difficult weather conditions, a second coat is recommended after 8 hours.
• After application, turn the spray upside down and spray until only gas comes out to clean the valve.
• Drying time: to the touch 2-3 hours depending on environmental conditions. 
• Wait at least 24 hours before heavy use of the surfaces or contact with fabrics.