Skroutz.mt

FFG GWP 50/212 H2 PRO Gasoline Surface Water Pump Centrifugal 7hp Clean Water
Surface Water Pumps

FFG GWP 50/212 H2 PRO Gasoline Surface Water Pump Centrifugal 7hp Clean Water Code: 46639

Code: 46639

Model: GWP 50/212 H2 PRO

Type: Surface - Two-stage - High head

Suitable for: Exclusively for Rainwater

Usage: Professional (pro use)

  • Inlet nozzle diameter: 2''
  • Outlet nozzle diameter:...

Code: 46639

Model: GWP 50/212 H2 PRO

Type: Surface - Two-stage - High head

Suitable for: Exclusively for Rainwater

Usage: Professional (pro use)

  • Inlet nozzle diameter: 2''
  • Outlet nozzle diameter: 2'', 1.5'', 1.5''
  • Maximum head: 80 m
  • Maximum flow rate: 16 m³/h
  • Maximum suction height: 7 m
  • Body material: Aluminum
  • Impeller material: Aluminum
  • Displacement: 212...
See full description See full description

  • Power Supply

    Gasoline

    Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.

  • Centrifugal

    Pumps with impellers that enhance water flow.

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
326 95 €
Delivery by Wed, 15 Jul
74,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (53)
5.0 (53 reviews)
Greece
See Water Pumps on the page of MdTools
Review the product
Product report

Description

Description

Code: 46639

Model: GWP 50/212 H2 PRO

Type: Surface - Two-stage - High head

Suitable for: Exclusively for Rainwater

Usage: Professional (pro use)

  • Inlet nozzle diameter: 2''
  • Outlet nozzle diameter: 2'', 1.5'', 1.5''
  • Maximum head: 80 m
  • Maximum flow rate: 16 m³/h
  • Maximum suction height: 7 m
  • Body material: Aluminum
  • Impeller material: Aluminum
  • Displacement: 212 cc
  • Rated power: 7 HP
  • Rated speed: 3600 min⁻¹
  • Fuel tank capacity: 3.6 Lt
  • Starting type: Manual start
  • Weight: 26 Kg

Performance:

  • Meters 44.6m | Cubic 14.9 m³/h
  • Meters 51.1m | Cubic 12.8 m³/h
  • Meters 57m | Cubic 8.6 m³/h
  • Meters 69.7m | Cubic 4.9 m³/h

Description:

Gasoline-powered surface pump, high head. Suitable for transferring clean water under pressure without particles. Air-cooled, four-stroke engine, heavy-duty, EURO 5. Pump body and two-stage impeller made of aluminum. Three (3) outlets. Sturdy steel frame, heavy-duty. Low oil level safety. Double air filter. Anti-vibration system.

The package includes:

  • 1 x Gasoline surface water pump

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
46639

Main Specifications

Type
Double Stage

Type

Double Stage
They have dual propellers that work together to pump the relevant process fluids. They are adjustable to send water either with more pressure or in a larger volume.
Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
Four-Stroke
Horsepower
7 hp
Flow Rate
16 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
80 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Code: 46639

Model: GWP 50/212 H2 PRO

Type: Surface - Two-stage - High head

Suitable for: Exclusively for Rainwater

Usage: Professional (pro use)

  • Inlet nozzle diameter: 2''
  • Outlet nozzle diameter: 2'', 1.5'', 1.5''
  • Maximum head: 80 m
  • Maximum flow rate: 16 m³/h
  • Maximum suction height: 7 m
  • Body material: Aluminum
  • Impeller material: Aluminum
  • Displacement: 212 cc
  • Rated power: 7 HP
  • Rated speed: 3600 min⁻¹
  • Fuel tank capacity: 3.6 Lt
  • Starting type: Manual start
  • Weight: 26 Kg

Performance:

  • Meters 44.6m | Cubic 14.9 m³/h
  • Meters 51.1m | Cubic 12.8 m³/h
  • Meters 57m | Cubic 8.6 m³/h
  • Meters 69.7m | Cubic 4.9 m³/h

Description:

Gasoline-powered surface pump, high head. Suitable for transferring clean water under pressure without particles. Air-cooled, four-stroke engine, heavy-duty, EURO 5. Pump body and two-stage impeller made of aluminum. Three (3) outlets. Sturdy steel frame, heavy-duty. Low oil level safety. Double air filter. Anti-vibration system.

The package includes:

  • 1 x Gasoline surface water pump

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
46639

Main Specifications

Type
Double Stage

Type

Double Stage
They have dual propellers that work together to pump the relevant process fluids. They are adjustable to send water either with more pressure or in a larger volume.
Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
Four-Stroke
Horsepower
7 hp
Flow Rate
16 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
80 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

326,95 €
74,00 €   shipping cost