Schneider Electric Thermal Magnetic Switch 4.00-6.30A GV2ME10AP. Manual thermal magnetic motor switch also known as motor protection switch from the TeSys Deca series. It is used to protect motors from short circuits, overloads, and faults. The nominal motor current is adjustable on the device with a selector.

• Rated operating voltage: 690 V AC.
• Rated operational current: 6.3 A.
• Rated insulation voltage (Ui): 690 V AC 50/60 Hz.
• Rated impulse withstand voltage: 6 kV.
• Thermal protection adjustment range: 4.0…6.3A.
• Number of poles: 3.
• Frequency: 50Hz.
• Motor Power kW: 4 kW at 690 VAC 50Hz.
• Control type: Button.
• Mounting method: Symmetrical DIN rail 35 mm: snap-on / Panel: with screws.
• Operating temperature: -20… +60 °C.
• Degree of protection: IP20.
• Breaking capacity: 100 kA Icu at 230/240 V AC 50Hz.
• Breaking capacity: 100 kA Icu at 400/415 V AC 50Hz.
• Breaking capacity: 50 kA Icu at 440 V AC 50Hz.
• Breaking capacity: 50 kA Icu at 500 V AC 50Hz.
• Breaking capacity: 3 kA Icu at 690 V AC 50Hz.
• Nominal short-circuit breaking capacity (lcs): 100 % at 230/240 V AC 50Hz.
• Nominal short-circuit breaking capacity (lcs): 100 % at 400/415 V AC 50Hz.
• Nominal short-circuit breaking capacity (lcs): 100 % at 440 V AC 50Hz.
• Nominal short-circuit breaking capacity (lcs): 100 % at 500 V AC 50Hz.
• Nominal short-circuit breaking capacity (lcs): 75 % at 690 V AC 50Hz.
• Motor Power kW: 2.2 kW at 400/415 V AC 50 Hz.
• Motor Power kW: 3 kW at 500 V AC 50 Hz.
• Motor Power kW: 4 kW at 690 V AC 50 Hz.
• Dimensions: Width: 45mm, Height: 89mm, Depth: 78.5mm.