Electric Panel Meters

Schneider Electric iEM3350 Digital Energy Analyzer for Electric Panel Rail Single Phase Modbus

The Schneider Electric iEM3350 power meter measures voltage, current, active power and active energy. It features a digital LCD display and Modbus RTU communication via RS485, and is used for...

The Schneider Electric iEM3350 power meter measures voltage, current, active power and active energy. It features a digital LCD display and Modbus RTU communication via RS485, and is used for sub-metering and tenant billing.

  • Display type: Digital LCD display
  • Mounting type: DIN rail, snap-on mounting
  • Number of phases: Single-phase
  • Connectivity: Modbus RTU...
See full description See full description

Top specs

See all
  • Connectivity Modbus
775 71 €
Delivery Thu, 26 Nov - Wed, 02 Dec
14,00 €   shipping cost
Sent from Greece
From Getters 4.5 (118)

Learn more about invoicing

Description & Specifications

The Schneider Electric iEM3350 power meter measures voltage, current, active power and active energy. It features a digital LCD display and Modbus RTU communication via RS485, and is used for sub-metering and tenant billing.

  • Display type: Digital LCD display
  • Mounting type: DIN rail, snap-on mounting
  • Number of phases: Single-phase
  • Connectivity: Modbus RTU via RS485
  • Maximum current: 125 A
  • Input: Direct
  • Measurements: Voltage, current, active power and active energy
  • Active energy accuracy class: Class 1 according to IEC 62053-21, class B according to EN 50470-3 and class 1 according to IEC 61557-12
  • Rated current: 125 A
  • Measuring current range: 0–125 A
  • Rated voltage: 100–277 V, 173–480 V
  • Network frequency: 50 Hz, 60 Hz
  • Sampling rate: 32 samples per cycle
  • Maximum measured energy: 99999999.9 kWh
  • Modbus RTU baud rate: 9.6, 19.2 and 38.4 kbaud
  • Modbus parity: Even, odd or none
  • Local indications: Power-on, accuracy check with yellow LED and active Modbus communication with yellow indicator
  • Inputs/outputs: 0/0
  • Terminals: Screw terminals, 50 mm² cross-section
  • Overvoltage category: III
  • Standards: IEC 61557-12, IEC 61010, IEC 62053-23, IEC 62053-21, IEC 61036, UL 61010-1
  • Certifications: UL, NMI, EAC, CE according to IEC 61010, CE according to IEC 61326-1, CULus according to ANSI C12.20, RCM according to NMI M 6-1, CE according to EN 61557-12, CULus according to UL 61010
  • Enclosure protection rating: IP20
  • Front panel protection rating: IP40
  • Pollution degree: 2
  • Relative humidity: 5–95% at 50 °C
  • Operating temperature: -25–60 °C according to NMI and IEC, -25–55 °C according to MID
  • Storage temperature: -40–85 °C
  • Colour: White
  • Width: 126 mm
  • Height: 103.2 mm
  • Depth: 69.3 mm
  • Width in modules: 14 modules of 9 mm

Manufacturer

Specifications

Type
Energy Analyzer
Display Type
Digital
Installation Type
Rail
Number of Phases
Single-phase
Maximum Current
125 A

Smart Features

Connectivity
Modbus

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

775,71 €
14,00 €   shipping cost