The E650-RL remote control board operates single-phase 230 V AC roller shutter motors with built-in limit switches and a power rating of up to 650 W. Its built-in receiver supports 433.92 MHz remote controls with either a 12-bit fixed code or a 24-bit rolling code and 64-bit KeeLoq. Diagnostic LEDs indicate signals received from remote controls, push buttons and photocells.

The board allows the motor operating time to be set from 2 to 240 seconds, as well as the automatic closing time. If the photocell beam is interrupted while the door is closing, the board stops the door and sends an open command. It can also be connected to a command push button and a warning light or 230 V AC lighting lamp; the light can remain on for 3 minutes after the door stops.

• Power supply: 230 V AC, single-phase
• Maximum motor power: 650 W
• Maximum accessory power: 3 W
• Phase protection fuse: 5 A slow-blow
• Remote control frequency: 433.92 MHz
• Remote control coding: 12-bit fixed code or 24-bit rolling code and 64-bit KeeLoq
• Receiver: Built-in, 433.92 MHz PLL
• Antenna: Internal
• Operating temperature: From -20 °C to +60 °C
• Housing material: ABS plastic
• Indicator lights: LEDs on the housing and board
• Housing dimensions: 145 x 105 x 55 mm
• Board dimensions: 110 x 90 x 45 mm
• Weight: 350 g
• Safety photocells: NC contact connection available
• Automatic closing: Adjustable from 2 to 240 seconds, with the option to disable
• Motor operating time: Adjustable from 2 to 240 seconds, up to a maximum of 4 minutes
• Motor power output: 230 V AC
• Accessory power output: 24 V AC
• Remote control programming: Via button
• Remote control deletion: Full memory deletion available
• Command push button: Connection available for full opening
• Warning light: 230 V AC connection available, with flashing operation
• Lighting lamp: 230 V AC connection available, with steady operation
• Removable terminal blocks: Yes
• Technology: SMD
• Marking: CE