GOMASTIT AQUA PROTECT FLEX LIQUID is a one-component, moisture-resistant waterproofing sealant based on SMP, a hybrid polymer. It is self-levelling and can be applied to horizontal and vertical surfaces to waterproof roofs, foundations and floor slabs, as well as to repair gutters and existing waterproofing systems.
Apply evenly in two coats using a roller or brush. The substrate must be dry, clean and stable. The application and substrate temperature must be between +5 °C and +35 °C.
- Type: One-component waterproofing sealant
- Base: SMP – hybrid polymer
- Property: Self-levelling
- Colour: Grey
- Suitable for: Horizontal and vertical surfaces
- Applications: Roofs, foundations, floor slabs, gutters, joints and existing waterproofing systems
- Adheres to: Aluminium, anodised aluminium, powder-coated aluminium, concrete, gypsum, plaster, lead, stainless steel, EPDM, asbestos cement, galvanised sheets and strips, GFRP – polyester, wood, tongue-and-groove boards, copper, brass, rigid and flexible PVC, roof tiles, roofing slabs, slate, steel, coated steel, bricks, concrete blocks and zinc sheets
- Working time: Up to 30 minutes
- First coat drying time: At least 6 hours at +20 °C, 50% humidity and a coat thickness of 1 mm
- Curing: At least 2.5 mm after 24 hours and 3.5 mm after 48 hours
- Shore A hardness: 35
- Modulus of elongation: Approximately 0.4 N/mm³
- Elongation at break: Approximately 300%
- Tensile strength: Approximately 1.0 N/mm²
- Consistency: Low viscosity
- Density: 1.47 ± 0.05 g/cm³
- Temperature resistance: From -40 °C to +90 °C
- Weight: 1.13 kg
- Product Number
- 55AP000047
Dimensions
- Colour
- Grey
Attributes
- Adhesive
- No
- Mold Resistant
- No
- for Wood
- No
- High Temperature
- No
- Aquarium
- No
- Acrylic
- No
- Polyurethane
- No
Quantity
- Weight
- 1130 gr
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.