Skroutz.mt

Imperia Plasma Cutting Inverter 80A
Welding Machines

Imperia Plasma Cutting Inverter 80A

PRO PLC 80 Plasma Metal Cutting Inverter 380V

Specifications:

  • Cutting Thickness (max.): 20mm
  • Voltage: 3Ph - AC 380V
  • Power: 11.3 A/KVA
  • Output: (A) 20 - 80
  • Duty Cycle @ 40°C: 40%
  • Weight N/G: 15 / 20 Kg...

PRO PLC 80 Plasma Metal Cutting Inverter 380V

Specifications:

  • Cutting Thickness (max.): 20mm
  • Voltage: 3Ph - AC 380V
  • Power: 11.3 A/KVA
  • Output: (A) 20 - 80
  • Duty Cycle @ 40°C: 40%
  • Weight N/G: 15 / 20 Kg

Description:

  • Non High Frequency
  • Three-phase
  • CNC Connection

Includes:

  • P80 cutting torch with 5m length
  • Cable with grounding clamp and air regulator
See full description

  • Welding Current

    80

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    380

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    11.3

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
Review the product
Product report

Description

Description

PRO PLC 80 Plasma Metal Cutting Inverter 380V

Specifications:

  • Cutting Thickness (max.): 20mm
  • Voltage: 3Ph - AC 380V
  • Power: 11.3 A/KVA
  • Output: (A) 20 - 80
  • Duty Cycle @ 40°C: 40%
  • Weight N/G: 15 / 20 Kg

Description:

  • Non High Frequency
  • Three-phase
  • CNC Connection

Includes:

  • P80 cutting torch with 5m length
  • Cable with grounding clamp and air regulator

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
80 A

Welding Current (max): 80


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
380 V

Supply Voltage: 380


It is the supply voltage that the machine requires from the electrical grid.
Power
11.3 kVA

Power: 11.3


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PRO PLC 80 Plasma Metal Cutting Inverter 380V

Specifications:

  • Cutting Thickness (max.): 20mm
  • Voltage: 3Ph - AC 380V
  • Power: 11.3 A/KVA
  • Output: (A) 20 - 80
  • Duty Cycle @ 40°C: 40%
  • Weight N/G: 15 / 20 Kg

Description:

  • Non High Frequency
  • Three-phase
  • CNC Connection

Includes:

  • P80 cutting torch with 5m length
  • Cable with grounding clamp and air regulator

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
80 A

Welding Current (max): 80


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
380 V

Supply Voltage: 380


It is the supply voltage that the machine requires from the electrical grid.
Power
11.3 kVA

Power: 11.3


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.106,70 €
65,00 €   shipping cost