Product Details

Power Source

Battery

Type

Excavator

Battery Specifications

Number of Batteries

2

Volt

18 V

Volt: 18

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.

Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.

Ah

5.5 Ah

Ah

The battery capacity. The higher the number, the longer the tool's operating time.
2.
An average continuous working time is 20-25 minutes per Ah, but it always depends on the type of work we are doing.

Lithium

Yes

Drilling Features

Cement Ø

13 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Cement with Hollow Core Cutters

75 mm

Cement with Hollow Core Cutters

The maximum possible drilling diameter in concrete using a diamond core drill bit.

Features

Maximum Motor Speed

800 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.

Impact Energy

5 Joule

Impact Energy: 5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

Tools with at least 5 Joules are recommended for heavy duty work and professional use.

Maximum Number of Impacts

4600 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.

Jam Protection

No

Socket

SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

Brushless

Yes

Brushless

It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.

Pneumatic

No

Speed Adjustable

Yes

Speed Adjustable

Ability to control the rotation speed, either through the trigger or via a speed selector.

Impact

Yes

Rotary

Yes

Screwing/Unscrewing

No

Additional Features

Carrying Case

Hard Case

Handle included

Yes

Integrated Light

No

Guide

No

Weight (with Battery)

4200 gr