Skroutz.mt

Huawei AirEngine 5761-21 Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)
Access Points

Huawei AirEngine 5761-21 Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)

An indoor next-generation Wi-Fi 6 (802.11ax) access point (AP), the AirEngine 5761-21 supports six spatial streams and features built-in smart antennas, where Wi-Fi signals follow users to provide...

An indoor next-generation Wi-Fi 6 (802.11ax) access point (AP), the AirEngine 5761-21 supports six spatial streams and features built-in smart antennas, where Wi-Fi signals follow users to provide always-on coverage, with a maximum rate of 5.375 Gbit/s. This AP excels in scenarios that require high bandwidth and high-quality network experience, from small...

See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
Review the product
Product report

Description

Description

An indoor next-generation Wi-Fi 6 (802.11ax) access point (AP), the AirEngine 5761-21 supports six spatial streams and features built-in smart antennas, where Wi-Fi signals follow users to provide always-on coverage, with a maximum rate of 5.375 Gbit/s. This AP excels in scenarios that require high bandwidth and high-quality network experience, from small and medium-sized enterprise offices and educational institutions to retail stores.

Wi-Fi 6 Technology

  • Features Multi-User Multiple-Input Multiple-Output (MU-MIMO) and Orthogonal Frequency Division Multiple Access (OFDMA) for efficient data transmission.
  • 1024 Quadrature Amplitude Modulation (QAM) and six spatial streams.
  • Air interface rate up to 5.375 Gbit/s.

Smart Antennas

  • Dual-band, coplanar, automatically suppress interference.
  • Double the signal strength and provide 20% wider coverage.
  • High-quality wireless coverage with zero blind spots.

Cloud Management

  • Huawei's cloud management platform simplifies the management of APs and services.
  • Reduces network operation and maintenance (O&M) costs.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
5375 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

An indoor next-generation Wi-Fi 6 (802.11ax) access point (AP), the AirEngine 5761-21 supports six spatial streams and features built-in smart antennas, where Wi-Fi signals follow users to provide always-on coverage, with a maximum rate of 5.375 Gbit/s. This AP excels in scenarios that require high bandwidth and high-quality network experience, from small and medium-sized enterprise offices and educational institutions to retail stores.

Wi-Fi 6 Technology

  • Features Multi-User Multiple-Input Multiple-Output (MU-MIMO) and Orthogonal Frequency Division Multiple Access (OFDMA) for efficient data transmission.
  • 1024 Quadrature Amplitude Modulation (QAM) and six spatial streams.
  • Air interface rate up to 5.375 Gbit/s.

Smart Antennas

  • Dual-band, coplanar, automatically suppress interference.
  • Double the signal strength and provide 20% wider coverage.
  • High-quality wireless coverage with zero blind spots.

Cloud Management

  • Huawei's cloud management platform simplifies the management of APs and services.
  • Reduces network operation and maintenance (O&M) costs.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
5375 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

456,90 €
14,00 €   shipping cost