Skroutz.mt

HyperTherm Powermax65 SYNC Plasma Cutting Inverter 65A
Welding Machines

HyperTherm Powermax65 SYNC Plasma Cutting Inverter 65A

The Powermax65 system features the latest technological innovations, such as Smart Sense technology, to automatically adjust the gas pressure.

A variety of Duramax torch styles provide excellent...

The Powermax65 system features the latest technological innovations, such as Smart Sense technology, to automatically adjust the gas pressure.

A variety of Duramax torch styles provide excellent flexibility for cutting and gouging. Below are some of the most common system settings:

  • Piercing capability: 16 mm
  • Gouging metal removal rate: 4.8 kg/hr
  • Input...
See full description See full description

  • Welding Current

    65

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    400

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
5518 00 €
Delivery by Mon, 29 Jun
86,00 €   shipping cost
Sent from Greece
From Tools4pro
Greece
1 piece
See Tools on the page of Tools4pro
Review the product
Product report

Description

Description

The Powermax65® system features the latest technological innovations, such as Smart Sense™ technology, to automatically adjust the gas pressure.

A variety of Duramax™ torch styles provide excellent flexibility for cutting and gouging. Below are some of the most common system settings:

  • Piercing capability: 16 mm
  • Gouging metal removal rate: 4.8 kg/hr
  • Input voltages: 400 V, three-phase
  • Output current: 20-65 A
  • Duty cycle: 50% @ 65 A, 100% @ 46 A
  • Weight: 26 kg
  • Gas supply: Clean, dry, oil-free air or nitrogen

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
65 A

Welding Current (max): 65


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
50 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Weight
26000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Powermax65® system features the latest technological innovations, such as Smart Sense™ technology, to automatically adjust the gas pressure.

A variety of Duramax™ torch styles provide excellent flexibility for cutting and gouging. Below are some of the most common system settings:

  • Piercing capability: 16 mm
  • Gouging metal removal rate: 4.8 kg/hr
  • Input voltages: 400 V, three-phase
  • Output current: 20-65 A
  • Duty cycle: 50% @ 65 A, 100% @ 46 A
  • Weight: 26 kg
  • Gas supply: Clean, dry, oil-free air or nitrogen

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
65 A

Welding Current (max): 65


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
50 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Weight
26000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

5.518,00 €
86,00 €   shipping cost