The managed Layer 2 Planet GSW-2824P Switch powers compatible devices via PoE+ and supports Standard, VLAN and Extend modes, selected using a DIP switch. It uses a Store-and-Forward architecture and can be installed on a desktop or in a rack.

• Ethernet ports: 24 PoE 10/100/1000BASE-T, 2 additional 10/100/1000BASE-T and 2 Gigabit TP/SFP combo ports
• SFP slots: 2 1000BASE-X SFP/mini-GBIC
• Auto MDI/MDIX: On 28 copper ports
• Switching capacity: 56 Gbps
• Forwarding rate: 41.66 Mpps for 64-byte packets
• MAC address table: 8,000 entries
• Jumbo frames: Up to 9,216 bytes
• Flow control: IEEE 802.3x pause frames in full duplex and back pressure in half duplex
• PoE: IEEE 802.3af and IEEE 802.3at PoE+ on 24 ports
• PoE power type: End-span, pins 1/2 (+) and 3/6 (-)
• PoE output per port: 54 ±1 V DC, up to 300 mA and 15.4 W with IEEE 802.3af, or up to 600 mA and 32 W with IEEE 802.3at
• Total PoE power: 250 W
• Supported PoE devices: 24 at 7 W, 16 at 15.4 W or 8 at 30 W
• LED indicators: Power, Ethernet and SFP port link and activity, PoE usage
• Enclosure: Metal
• Dimensions: 441.5 × 207.3 × 44 mm, 1U height
• Weight: 3,022 g
• Power supply: 100–240 V AC, 50/60 Hz, up to 5 A
• Maximum power consumption and heat dissipation: 278 W and 948 BTU
• Fans: 2
• ESD protection: ±6 kV DC for contact discharge and ±8 kV DC for air discharge
• Surge protection: ±6 kV
• Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az
• Regulatory compliance: FCC Part 15 Class A, CE
• Operating temperature: 0–50 °C
• Storage temperature: -10–70 °C
• Operating and storage relative humidity: 5–95%, non-condensing