Skroutz.mt

Hanna DiST-3 EC Water Quality Meter with EC pH Temperature Measurement Capability
Water Quality Meters

Hanna DiST-3 EC Water Quality Meter with EC pH Temperature Measurement Capability

Specifications

  • Conductivity range: 0 to 1999 S/cm
  • Conductivity resolution: 1 S/cm
  • Conductivity accuracy: 2% F.S.
  • Manual pH calibration
  • Single point
  • Temperature compensation: From 0 to 50 °C (32 to 122 °F)
  • ...

Specifications

  • Conductivity range: 0 to 1999 S/cm
  • Conductivity resolution: 1 S/cm
  • Conductivity accuracy: 2% F.S.
  • Manual pH calibration
  • Single point
  • Temperature compensation: From 0 to 50 °C (32 to 122 °F)
  • Battery type/life: 1.5V (4)/ approximately 200 hours of continuous use
  • Environment: < 0 to 50 °C (32 to 122 °F). RH maximum 95% without condensation
  • Dimensions: 175 x 41 x 23mm
  • Weight: 95g

Includes:

  • Protective cap
  • Screwdriver
  • ...
< 0 to 50 °C (32 to 122 °F). RH maximum 95% without condensation
See full description See full description
Review the product
Product report

Description

Description

Specifications

  • Conductivity range: 0 to 1999 S/cm
  • Conductivity resolution: 1 S/cm
  • Conductivity accuracy: 2% F.S.
  • Manual pH calibration
  • Single point
  • Temperature compensation: From 0 to 50 °C (32 to 122 °F)
  • Battery type/life: 1.5V (4)/ approximately 200 hours of continuous use
  • Environment: < 0 to 50 °C (32 to 122 °F). RH maximum 95% without condensation
  • Dimensions: 175 x 41 x 23mm
  • Weight: 95g

Includes:

  • Protective cap
  • Screwdriver
  • Batteries
  • Instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Digital
Yes
Calibration Capability
No
ATC
-
Photometer Type
-

Measurement Capability

TDS
No

TDS

(Total Dissolved Solids) Measures the total amount of dissolved solid substances in water (e.g. salts, minerals, inorganic elements). The value is usually expressed in ppm (parts per million) or mg/L. It is used for a quick assessment of the water's purity and its content of dissolved elements.
EC
Yes

EC

Measures the electrical conductivity of water, that is, its ability to conduct electric current due to the presence of dissolved ions. The value is usually expressed in μS/cm or mS/cm and is used to monitor the concentration of salts and nutrients.
pH
Yes

pH

Measures the level of acidity or alkalinity of water on a scale from 0 to 14. Values below 7 indicate acidic water, a value of 7 is neutral, and values above 7 indicate alkaline water. It is used in applications such as aquariums, swimming pools, hydroponics, and water quality control.
Temperature
Yes

Temperature

Measures the water temperature, which significantly affects other quality measurements, such as pH, conductivity (EC), and dissolved oxygen.
ORP
No
Salinity
-
Hardness
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Specifications

  • Conductivity range: 0 to 1999 S/cm
  • Conductivity resolution: 1 S/cm
  • Conductivity accuracy: 2% F.S.
  • Manual pH calibration
  • Single point
  • Temperature compensation: From 0 to 50 °C (32 to 122 °F)
  • Battery type/life: 1.5V (4)/ approximately 200 hours of continuous use
  • Environment: < 0 to 50 °C (32 to 122 °F). RH maximum 95% without condensation
  • Dimensions: 175 x 41 x 23mm
  • Weight: 95g

Includes:

  • Protective cap
  • Screwdriver
  • Batteries
  • Instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Digital
Yes
Calibration Capability
No
ATC
-
Photometer Type
-

Measurement Capability

TDS
No

TDS

(Total Dissolved Solids) Measures the total amount of dissolved solid substances in water (e.g. salts, minerals, inorganic elements). The value is usually expressed in ppm (parts per million) or mg/L. It is used for a quick assessment of the water's purity and its content of dissolved elements.
EC
Yes

EC

Measures the electrical conductivity of water, that is, its ability to conduct electric current due to the presence of dissolved ions. The value is usually expressed in μS/cm or mS/cm and is used to monitor the concentration of salts and nutrients.
pH
Yes

pH

Measures the level of acidity or alkalinity of water on a scale from 0 to 14. Values below 7 indicate acidic water, a value of 7 is neutral, and values above 7 indicate alkaline water. It is used in applications such as aquariums, swimming pools, hydroponics, and water quality control.
Temperature
Yes

Temperature

Measures the water temperature, which significantly affects other quality measurements, such as pH, conductivity (EC), and dissolved oxygen.
ORP
No
Salinity
-
Hardness
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

88,04 €
14,00 €   shipping cost