Soldering Irons

Yihua YH-948-I Soldering Station Electric 60W with Temperature Setting

The Yihua YH-948-I soldering station functions as a soldering or desoldering station with a desoldering gun. Each function is selected separately using the corresponding ON-OFF-ON switch. It features...

The Yihua YH-948-I soldering station functions as a soldering or desoldering station with a desoldering gun. Each function is selected separately using the corresponding ON-OFF-ON switch. It features a temperature sensor and thermostat, while the temperature is adjusted using buttons and displayed on the LED screen.

The station includes a soldering iron and...

See full description See full description

Top specs

  • Power Supply Electric
  • Power 60 W
  • Temperature Adjustment
  • Function Desoldering, Soldering
  • See all
135 00 €
Delivery by Tue, 10 Nov
14,00 €   shipping cost
Sent from Greece
From Alifragis 4.2 (40)
Greece
5 pieces
See Power Tools on the page of Alifragis

Learn more about invoicing

Description

Description

The Yihua YH-948-I soldering station functions as a soldering or desoldering station with a desoldering gun. Each function is selected separately using the corresponding ON-OFF-ON switch. It features a temperature sensor and thermostat, while the temperature is adjusted using buttons and displayed on the LED screen.

The station includes a soldering iron and a desoldering iron. The vacuum pump has a power rating of 12 W and a suction pressure of 0.05 MPa.

  • Power supply: Mains
  • Power: 60 W
  • Functions: Soldering and desoldering
  • Temperature adjustment: Yes
  • Soldering iron temperature range: 200–480 °C
  • Desoldering gun temperature range: 350–480 °C
  • Display: LED
  • Vacuum pump power: 12 W
  • Suction pressure: 0.05 MPa
  • Package contents: 4 carbon filters, 2 paper filters, 2 desoldering iron tips, 2 metal filters, 1 front rubber cover, 1 stand for the soldering iron and desoldering iron, cleaning wire for the desoldering iron

Manufacturer

See full description

Specifications

Specifications

Main Specifications

Type
Soldering Station
Power Source
Electric

Current Specifications

Power
60 W

Features & Functions

Temperature Setting
Yes

Soldering Stations

Mode
Desoldering, Soldering
Display Screen
Yes

Additional Specifications

Carrying Case
Without
LED
No

Battery Specifications

Solo
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

  1. 2
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Volume
  • Easy to use
  • Soldering cable length
  • Power
  • Construction quality
  • Value for money
  • Heating time
  • Machine durability
  • ARGYRIS_ARGYRIS
    3
    1 out of 2 members found this review helpful

    Verified purchase

    It is the first time I bought a soldering-desoldering station. I can't say that I am super satisfied. The desoldering works well, but only for small soldering joints. When they are thicker, it doesn't suck up all the material 100%. It leaves a little bit and I have to take it off with a soldering iron.
    The soldering iron does not have a stable temperature. I had to solder a 12v relay with slightly thicker pins and it took quite a few seconds to heat it up again, not properly with the temperature at maximum. Luckily, I had my old soldering iron and the job was done correctly and quickly.
    For small resistors, diodes, capacitors, etc., it is good. For thicker jobs, it doesn't work, for example, power transistors.

    Translated from Greek ·
    • Construction quality
    • Volume
    • Easy to use
    • Soldering cable length
    • Power
    • Value for money
    • Heating time
    Did you find this review helpful?
    • Power
    • Volume
    • Easy to use
    • Soldering cable length
    • Value for money
    • Heating time
    • Machine durability
    • Construction quality
  • Verified purchase

  • It is the first time I bought a soldering-desoldering station. I can't say that I am super satisfied. The desoldering works well, but only for small soldering joints. When they are thicker, it doesn't suck up all the material 100%. It leaves a little bit and I have to take it off with a soldering iron.
    The soldering iron does not have a stable temperature. I had to solder a 12v relay with slightly thicker pins and it took quite a few seconds to heat it up again, not properly with the temperature at maximum. Luckily, I had my old soldering iron and the job was done correctly and quickly.
    For small resistors, diodes, capacitors, etc., it is good. For thicker jobs, it doesn't work, for example, power transistors.

    Translated from Greek ·
    1
  • 0
  • 0
  • See all

Description & Specifications

The Yihua YH-948-I soldering station functions as a soldering or desoldering station with a desoldering gun. Each function is selected separately using the corresponding ON-OFF-ON switch. It features a temperature sensor and thermostat, while the temperature is adjusted using buttons and displayed on the LED screen.

The station includes a soldering iron and a desoldering iron. The vacuum pump has a power rating of 12 W and a suction pressure of 0.05 MPa.

  • Power supply: Mains
  • Power: 60 W
  • Functions: Soldering and desoldering
  • Temperature adjustment: Yes
  • Soldering iron temperature range: 200–480 °C
  • Desoldering gun temperature range: 350–480 °C
  • Display: LED
  • Vacuum pump power: 12 W
  • Suction pressure: 0.05 MPa
  • Package contents: 4 carbon filters, 2 paper filters, 2 desoldering iron tips, 2 metal filters, 1 front rubber cover, 1 stand for the soldering iron and desoldering iron, cleaning wire for the desoldering iron

Manufacturer

Main Specifications

Type
Soldering Station
Power Source
Electric

Current Specifications

Power
60 W

Features & Functions

Temperature Setting
Yes

Soldering Stations

Mode
Desoldering, Soldering
Display Screen
Yes

Additional Specifications

Carrying Case
Without
LED
No

Battery Specifications

Solo
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

  1. 2
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Volume
  • Easy to use
  • Soldering cable length
  • Power
  • Construction quality
  • Value for money
  • Heating time
  • Machine durability
  • ARGYRIS_ARGYRIS
    3
    1 out of 2 members found this review helpful

    Verified purchase

    It is the first time I bought a soldering-desoldering station. I can't say that I am super satisfied. The desoldering works well, but only for small soldering joints. When they are thicker, it doesn't suck up all the material 100%. It leaves a little bit and I have to take it off with a soldering iron.
    The soldering iron does not have a stable temperature. I had to solder a 12v relay with slightly thicker pins and it took quite a few seconds to heat it up again, not properly with the temperature at maximum. Luckily, I had my old soldering iron and the job was done correctly and quickly.
    For small resistors, diodes, capacitors, etc., it is good. For thicker jobs, it doesn't work, for example, power transistors.

    Translated from Greek ·
    • Construction quality
    • Volume
    • Easy to use
    • Soldering cable length
    • Power
    • Value for money
    • Heating time
    Did you find this review helpful?
    • Power
    • Volume
    • Easy to use
    • Soldering cable length
    • Value for money
    • Heating time
    • Machine durability
    • Construction quality
  • Verified purchase

  • It is the first time I bought a soldering-desoldering station. I can't say that I am super satisfied. The desoldering works well, but only for small soldering joints. When they are thicker, it doesn't suck up all the material 100%. It leaves a little bit and I have to take it off with a soldering iron.
    The soldering iron does not have a stable temperature. I had to solder a 12v relay with slightly thicker pins and it took quite a few seconds to heat it up again, not properly with the temperature at maximum. Luckily, I had my old soldering iron and the job was done correctly and quickly.
    For small resistors, diodes, capacitors, etc., it is good. For thicker jobs, it doesn't work, for example, power transistors.

    Translated from Greek ·
    1
  • 0
  • 0
  • See all
135,00 €
14,00 €   shipping cost