Skroutz.mt

Digital Clamp Meter 400A AC Kewtech KT203
Clamp Meters

Digital Clamp Meter 400A AC Kewtech KT203

The Kewtech KT203 digital clamp meter measures AC and DC current up to 400 A, and AC and DC voltage up to 600 V. It measures resistance up to 4 kΩ and features a continuity buzzer that sounds below 50...

The Kewtech KT203 digital clamp meter measures AC and DC current up to 400 A, and AC and DC voltage up to 600 V. It measures resistance up to 4 kΩ and features a continuity buzzer that sounds below 50 35 Ω.

The display has 4,000 counts, while the Data Hold function retains the reading. The device features a standby function, an overrange indicator and...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Kewtech KT203 digital clamp meter measures AC and DC current up to 400 A, and AC and DC voltage up to 600 V. It measures resistance up to 4 kΩ and features a continuity buzzer that sounds below 50 ± 35 Ω.

The display has 4,000 counts, while the Data Hold function retains the reading. The device features a standby function, an overrange indicator and protection.

  • Display: Digital, 4,000 counts
  • AC current measurement: 40/400 A
  • DC current measurement: 40/400 A
  • AC voltage measurement: 400/600 V
  • DC voltage measurement: 400/600 V
  • Resistance measurement: 400 Ω/4 kΩ
  • Continuity test: Buzzer below 50 ± 35 Ω
  • Jaw opening: Ø 30 mm
  • Functions: Data Hold and standby
  • Indicators and protection: Overrange
  • Safety standard: IEC 61010-1 CAT.III 300 V, CAT.II 600 V
  • Withstand voltage: 3,700 V AC for 1 minute
  • Power supply: 2 × 1.5 V R03 batteries
  • Package contents: 7066 test leads
  • Dimensions: 184 × 44 × 27 mm
  • Weight: Approx. 250 g

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information

Dimensions

with Test Leads
Yes

with Test Leads


It has measurement terminals that have a red wire for positive and a black wire for negative.
AC Current
400 A
Indication
Digital
Bluetooth
No
ISO/NIST Calibration Certificate
No

Features & Functions

Inrush Current
-

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
No
NCV
No
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
-

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
-

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

138,90 €
14,00 €   shipping cost