1. Remove the product and accessories from the packaging, double-check all included accessories.
2. Open the battery compartment at the back of the timer and follow the "+" "-" signs to insert 2 AA alkaline batteries.
3. Place the black O-ring 3mm inside the connector.
4. Screw the black adapter onto the connector (the adapter is not required for a 3/4" tap).
5. Screw the upper connector onto the 1/2 inch tap as tightly as possible, the 360° rotating connector makes it easy to install at any angle. Connect the water outlet of the timer to the hose.
During the summer months, the plants in your garden and balcony are always thirsty. Automatic watering is the solution; the battery-operated irrigation programmer ensures the proper and economical watering of your plants when you are away or asleep, without needing to keep their care in mind.
These specific irrigation programmers operate with alkaline batteries that can last up to two years (it is advisable to change them every season) and connect easily directly to the faucet. With the same programmer, you can water different areas of your garden separately, such as the lawn, the flowers on the terrace, or the flower beds.
Easy setup
1. Remove the product and accessories from the packaging, double-check all included accessories.
2. Open the battery compartment at the back of the timer and follow the "+" "-" signs to insert 2 AA alkaline batteries.
3. Place the black O-ring 3mm inside the connector.
4. Screw the black adapter onto the connector (the adapter is not required for a 3/4" tap).
5. Screw the upper connector onto the 1/2 inch tap as tightly as possible, the 360° rotating connector makes it easy to install at any angle. Connect the water outlet of the timer to the hose.
Easy programming and Full LCD screen to display your settings and built-in rain sensor to avoid overwatering.
3 separate programs (P1, P2, P3)
Set up to 3 different programs separately, don't miss any watering.
Specifications:
- Watering duration from 1 - 99 minutes and 59 seconds (1 hour and 40 minutes)
- Watering frequency every hour (24H) and from 1 - 15 days
- 3 separate programs (P1, P2, P3)
- Input connection: 3/4‘’ female thread (includes a reducer for 1/2")
- Output connection: 3/4 ‘’ male thread
- Operating pressure: 1 – 8 Bar
- Operating temperature: 1-45 °C
- Size: 86x56x160mm
- Waterproof rating: IPX5
- Operates with two 1.5V AA alkaline batteries (not included)
Features & Settings
- Mode
- Battery
- Stops
- 1
- Expandable
- No
- Rain Sensor Connection
- Yes
- Permanent Memory
- No
Connection & Sockets
- Outputs
- 1
- with Solenoid Valve
- No
- Connection Thread
- 1/2", 3/4"
Protection & Performance
- Maximum Pressure
- 8 bar
- Protection Certification
- IPX5
Watering Settings
- Time Delay
- No
- Manual Watering
- Yes
- Weekly Scheduling
- No
- Hourly Programming
- Yes
- Cyclic Programming
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.