Skroutz.mt

Einhell Ge Dp 900 Cut Single-phase Pump Waste Water / Sewage 1.2hp 4181550
Submersible Water Pumps

Einhell Ge Dp 900 Cut Single-phase Pump Waste Water / Sewage 1.2hp 4181550

The GE-DP 900 CUT dirty water pump is a powerful assistant in critical flooding situations or for the prevention of such events. It is used for removing liquid and debris from homes, gardens, lakes,...

The GE-DP 900 CUT dirty water pump is a powerful assistant in critical flooding situations or for the prevention of such events. It is used for removing liquid and debris from homes, gardens, lakes, and wells. It can also be used for cleaning in pits and cisterns, as well as in large docks and water tanks.

With a power of 900W, it allows a flow rate of up to...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

The GE-DP 900 CUT dirty water pump is a powerful assistant in critical flooding situations or for the prevention of such events. It is used for removing liquid and debris from homes, gardens, lakes, and wells. It can also be used for cleaning in pits and cisterns, as well as in large docks and water tanks.

With a power of 900W, it allows a flow rate of up to 16,000 liters per hour. The pump housing is made of cast aluminum and cast iron, providing durability over time.

Convenient setting: The float switch is fully adjustable, allowing you to set its operation. You can preselect the activation/deactivation level so that it performs its work when the water and waste level exceed the specified limit. The device can operate continuously, serving the needs of the situation.

Easy transport: The pump features an ergonomic handle for easy carrying and placement. The power connection cable is 10m long, allowing for safe operation from an outlet or generator. Thus, it can pump dirty water from your chosen location, and the cable can be secured on top of the pump.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
-

Features

Electronic Level Sensor
-

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
-

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
-

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
-

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
-

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The GE-DP 900 CUT dirty water pump is a powerful assistant in critical flooding situations or for the prevention of such events. It is used for removing liquid and debris from homes, gardens, lakes, and wells. It can also be used for cleaning in pits and cisterns, as well as in large docks and water tanks.

With a power of 900W, it allows a flow rate of up to 16,000 liters per hour. The pump housing is made of cast aluminum and cast iron, providing durability over time.

Convenient setting: The float switch is fully adjustable, allowing you to set its operation. You can preselect the activation/deactivation level so that it performs its work when the water and waste level exceed the specified limit. The device can operate continuously, serving the needs of the situation.

Easy transport: The pump features an ergonomic handle for easy carrying and placement. The power connection cable is 10m long, allowing for safe operation from an outlet or generator. Thus, it can pump dirty water from your chosen location, and the cable can be secured on top of the pump.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
-

Features

Electronic Level Sensor
-

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
-

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
-

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
-

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
-

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product