Skroutz.mt

RPS80-G Electric Delta Sander 80W with Suction System 5133002905
Sanders

RPS80-G Electric Delta Sander 80W with Suction System 5133002905

The Ryobi RPS80-G delta sander is powered by an 80 W electric motor and delivers 24,000 oscillations per minute at a speed of 12,000 RPM. Its slim triangular design and front sanding pad make it...

The Ryobi RPS80-G delta sander is powered by an 80 W electric motor and delivers 24,000 oscillations per minute at a speed of 12,000 RPM. Its slim triangular design and front sanding pad make it easier to reach corners and hard-to-access areas. It is suitable for fine sanding and preparing surfaces for painting.

The dust extraction system includes a dust...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    1.6

    Very fine sanding, sensitive materials, finishing.
  • See all
41 88 €
Delivery by Wed, 11 Nov
14,00 €   shipping cost
Sent from Greece
From Agreecon
Greece
5 pieces
See Power Tools on the page of Agreecon

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Ryobi RPS80-G delta sander is powered by an 80 W electric motor and delivers 24,000 oscillations per minute at a speed of 12,000 RPM. Its slim triangular design and front sanding pad make it easier to reach corners and hard-to-access areas. It is suitable for fine sanding and preparing surfaces for painting.

The dust extraction system includes a dust collection container.

  • Power source: Mains-powered
  • Power: 80 W
  • Oscillations: 24,000 per minute
  • Speed: 12,000 RPM
  • Orbit diameter: 1.6 mm
  • Sandpaper dimensions: 99 × 149 mm
  • Dust extraction system: With dust collection container

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Delta Sander

Type

Delta Sander
For smoothing corners and edges with a triangular base for smoothing.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
80 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
149x99 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Ryobi RPS80-G delta sander is powered by an 80 W electric motor and delivers 24,000 oscillations per minute at a speed of 12,000 RPM. Its slim triangular design and front sanding pad make it easier to reach corners and hard-to-access areas. It is suitable for fine sanding and preparing surfaces for painting.

The dust extraction system includes a dust collection container.

  • Power source: Mains-powered
  • Power: 80 W
  • Oscillations: 24,000 per minute
  • Speed: 12,000 RPM
  • Orbit diameter: 1.6 mm
  • Sandpaper dimensions: 99 × 149 mm
  • Dust extraction system: With dust collection container

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Delta Sander

Type

Delta Sander
For smoothing corners and edges with a triangular base for smoothing.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
80 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
149x99 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

41,88 €
14,00 €   shipping cost
Ryobi