Skroutz.mt

Metabo Ssw 18 Ltx 1750 Impact Wrench Battery 18V Solo with Socket 3/4"
Impact Wrenches

Metabo Ssw 18 Ltx 1750 Impact Wrench Battery 18V Solo with Socket 3/4"

Built for heavy-duty applications - 3/4" square drive with friction ring and through hole, 1,750 Nm maximum fastening torque, 2,150 Nm maximum nut-busting/breakaway torque, maximum nut/bolt size M33,...

Built for heavy-duty applications - 3/4" square drive with friction ring and through hole, 1,750 Nm maximum fastening torque, 2,150 Nm maximum nut-busting/breakaway torque, maximum nut/bolt size M33, and overload protection to prevent overheating.

Power and control - 12 (10+ APS Power Mode) speed/torque levels, variable speed APS (Automatic Power Shift)...

See full description See full description

Top specs

  • Volt

    Battery/tool voltage

  • Speed Setting

    Allows adjustment of the rotation speed according to the material and task, for precision and control.

  • Maximum Torque

    The rotational force that the tool can apply. Higher torque → ability to tighten without slipping.

  • Socket

    The mechanism that holds the tool's tip or bar.
  • Weight (Net) 3.03 kg
  • See all
614 00 €
Delivery Wed, 12 Aug - Fri, 14 Aug
14,00 €   shipping cost
Sent from Greece
From Paisidis
Greece
1 piece
See Power Tools on the page of Paisidis

Learn more about invoicing
Review the product
Product report

Description

Description

Built for heavy-duty applications - 3/4" square drive with friction ring and through hole, 1,750 Nm maximum fastening torque, 2,150 Nm maximum nut-busting/breakaway torque, maximum nut/bolt size M33, and overload protection to prevent overheating.

Power and control - 12 (10+ APS Power Mode) speed/torque levels, variable speed APS (Automatic Power Shift) activation function that automatically stops after the first impact to prevent over-tightening and automatically reduces speed once the nut/bolt is loosened to prevent fastener loss.

Integrated safety - APS (Automatic Power Shift) function automatically reduces speed once the nut/bolt is loosened to avoid falling/flying fasteners, built-in drop protection, safety lanyard attachment point, and high torque with low kickback.

Comfortable use - Compact size and weight, rubber grip, and integrated LED work light.

  • Maximum fastener size - M33
  • Maximum no-load speed - 1,650 rpm
  • Maximum impact rate - 2,450 bpm
  • Maximum torque - 1,750 Nm
  • Maximum breakaway torque - 2,100 Nm
  • Speed/torque levels - 12
  • Drive type - 3/4” male square
  • Weight without battery - 3.08 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Battery
Bit Size
3/4"

Bit Size

The mechanism that holds the tool's tip or bar.
Net Weight
3.03 kg

Battery Specifications

Number of Batteries
0

Number of Batteries: 0


The package does not include a battery and charger (solo). Please prefer it if you already have a compatible battery from other tools.
Volt
18 V

Volt

Battery/tool voltage
Lithium
No
Compatible Battery Type
-

Features & Functions

Maximum Motor Speed
1650 rpm
Speed Setting
Yes

Speed Setting

Allows adjustment of the rotation speed according to the material and task, for precision and control.
Maximum Torque
1750 Nm

Maximum Torque

The rotational force that the tool can apply. Higher torque → ability to tighten without slipping.
Torque Adjustment
No

Torque Adjustment

The greater the torque, the tighter a nut can be fastened or loosened.
Brushless
No

Brake Type

Axle Brake
No

Axle Brake

Mechanism that immobilizes the axle as soon as you release the trigger.
Electric Brake
No

Electric Brake

Specific mechanism that reverses the current in the motor the moment you release the trigger. This causes the anvil to stop almost instantly.
Electronic Brake
No

Electronic Brake

Specific mechanism that reverses the current in the motor at the moment you release the trigger, controlled via an electronic board (controller) that manages the motor. The board decides when and how the current will be reversed.

Extras

Carrying Case
Without
Built-In Light
No
Kit Contents
Solo

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Built for heavy-duty applications - 3/4" square drive with friction ring and through hole, 1,750 Nm maximum fastening torque, 2,150 Nm maximum nut-busting/breakaway torque, maximum nut/bolt size M33, and overload protection to prevent overheating.

Power and control - 12 (10+ APS Power Mode) speed/torque levels, variable speed APS (Automatic Power Shift) activation function that automatically stops after the first impact to prevent over-tightening and automatically reduces speed once the nut/bolt is loosened to prevent fastener loss.

Integrated safety - APS (Automatic Power Shift) function automatically reduces speed once the nut/bolt is loosened to avoid falling/flying fasteners, built-in drop protection, safety lanyard attachment point, and high torque with low kickback.

Comfortable use - Compact size and weight, rubber grip, and integrated LED work light.

  • Maximum fastener size - M33
  • Maximum no-load speed - 1,650 rpm
  • Maximum impact rate - 2,450 bpm
  • Maximum torque - 1,750 Nm
  • Maximum breakaway torque - 2,100 Nm
  • Speed/torque levels - 12
  • Drive type - 3/4” male square
  • Weight without battery - 3.08 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Battery
Bit Size
3/4"

Bit Size

The mechanism that holds the tool's tip or bar.
Net Weight
3.03 kg

Battery Specifications

Number of Batteries
0

Number of Batteries: 0


The package does not include a battery and charger (solo). Please prefer it if you already have a compatible battery from other tools.
Volt
18 V

Volt

Battery/tool voltage
Lithium
No
Compatible Battery Type
-

Features & Functions

Maximum Motor Speed
1650 rpm
Speed Setting
Yes

Speed Setting

Allows adjustment of the rotation speed according to the material and task, for precision and control.
Maximum Torque
1750 Nm

Maximum Torque

The rotational force that the tool can apply. Higher torque → ability to tighten without slipping.
Torque Adjustment
No

Torque Adjustment

The greater the torque, the tighter a nut can be fastened or loosened.
Brushless
No

Brake Type

Axle Brake
No

Axle Brake

Mechanism that immobilizes the axle as soon as you release the trigger.
Electric Brake
No

Electric Brake

Specific mechanism that reverses the current in the motor the moment you release the trigger. This causes the anvil to stop almost instantly.
Electronic Brake
No

Electronic Brake

Specific mechanism that reverses the current in the motor at the moment you release the trigger, controlled via an electronic board (controller) that manages the motor. The board decides when and how the current will be reversed.

Extras

Carrying Case
Without
Built-In Light
No
Kit Contents
Solo

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

614,00 €
14,00 €   shipping cost