Skroutz.mt

Schneider Electric Acti 9 iCT Phase 2-Pole Power Relay 16A 240V
Phase Relays

Schneider Electric Acti 9 iCT Phase 2-Pole Power Relay 16A 240V

The Schneider Electric Acti 9 iCT modular contactor controls motors, heating and lighting both remotely and manually. It has two poles and two normally open (NO) contacts, with a control voltage of...

The Schneider Electric Acti 9 iCT modular contactor controls motors, heating and lighting both remotely and manually. It has two poles and two normally open (NO) contacts, with a control voltage of 230–240 V AC at 50 Hz.

It clips onto a symmetrical 35 mm DIN rail. The control-circuit and power-circuit terminals accept rigid and flexible cables in the...

See Description & Specifications See Description & Specifications
61 90 €
Delivery Tue, 24 Nov - Mon, 30 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.5 (117)
4.5 (117 reviews)
Greece
See Electrical Panel Supplies on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Schneider Electric Acti 9 iCT modular contactor controls motors, heating and lighting both remotely and manually. It has two poles and two normally open (NO) contacts, with a control voltage of 230–240 V AC at 50 Hz.

It clips onto a symmetrical 35 mm DIN rail. The control-circuit and power-circuit terminals accept rigid and flexible cables in the specified cross-sections.

  • Type: Power
  • Rated current: 16 A AC-7A
  • AC-7B current: 6 A
  • Number of poles: 2
  • Contacts: 2 normally open (NO)
  • Control voltage: 230–240 V AC, 50 Hz
  • Operating voltage Ue: 250 V AC, 50 Hz
  • Insulation voltage Ui: 500 V AC, 50/60 Hz
  • Rated impulse withstand voltage Uimp: 4 kV
  • Maximum power: 2.1 kW at 250 V AC
  • Mains frequency: 50/60 Hz
  • Standby consumption: 3.8 VA
  • Inrush power: 9.2 VA
  • Mounting: Clip-on, on a symmetrical 35 mm DIN rail
  • Dimensions: 81 × 18 × 60 mm
  • Colour: White
  • Electrical endurance: 200,000 cycles at 50/60 Hz AC
  • Control-circuit terminals: 2 × 1.5 mm² for rigid cable, 1 × 1.5–2.5 mm² for rigid cable and 2 × 1.5–2.5 mm² for flexible cable
  • Power-circuit terminals: 1 × 1–4 mm² for flexible cable and 1 × 1.5–6 mm² for rigid cable
  • Tightening torque: 0.8 N·m
  • Standards: EN 61095, IEC 1095
  • Noise level: 30 dB
  • Power loss: 0.9 W
  • Degree of protection: IP20
  • Pollution degree: 2
  • Relative humidity: 95% at 55 °C
  • Operating altitude: up to 2,000 m
  • Operating temperature: -5–60 °C
  • Storage temperature: -40–70 °C
  • Compatibility: IACTs
  • Timer: Included

Manufacturer

Manufacturer Details

Warnings & Safety Information
Type
Power
Number of Poles
2
Voltage
240 V
Nominal Voltage
16 A
with Energy Consumption Meter
No
with Timer
Yes
Type of Residual Current Relay
Type A

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

61,90 €
14,00 €   shipping cost