Skroutz.mt

Azurefilm PLA 3D Printer Filament 1.75mm Ice Cream Pink Pastel 1kg
3D Printer Filament

Azurefilm PLA 3D Printer Filament 1.75mm Ice Cream Pink Pastel 1kg Code: FPL-OA0016

This 3D printing filament is made from PLA, a material known for its ease of use and eco-friendliness. Ideal for a variety of applications, the filament has a diameter of 1.75 millimeters, ensuring it...

This 3D printing filament is made from PLA, a material known for its ease of use and eco-friendliness. Ideal for a variety of applications, the filament has a diameter of 1.75 millimeters, ensuring it can be used with most 3D printers on the market.

The "Pink" shade it features adds a beautiful and vibrant aesthetic to any project you create. The filament...

See full description See full description

  • Material

    PLA

    Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
The product is not available at Skroutz Last updated: 3 months ago
Product report

Description

Description

This 3D printing filament is made from PLA, a material known for its ease of use and eco-friendliness. Ideal for a variety of applications, the filament has a diameter of 1.75 millimeters, ensuring it can be used with most 3D printers on the market.

The "Pink" shade it features adds a beautiful and vibrant aesthetic to any project you create. The filament weight is 1 kilogram, providing a sufficient amount for many prints.

  • Material: PLA, environmentally friendly
  • Diameter: 1.75 millimeters, compatible with most printers
  • Color: Pink, ideal for creative and playful projects
  • Weight: 1 kilogram, offering enough quantity for a variety of prints

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
FPL-OA0016
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Pink
Diameter
1.75 mm
Weight
1 kg
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (29)

Reviews

4.0
29
4.0
Review this product
  1. 16
  2. 2
  3. 7
  4. 3
  5. 1
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • John_Lafa
    2
    John_Lafa

    One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • sam230178
    5
    sam230178

    The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • o_uperkatanalwths
    5
    o_uperkatanalwths

    Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • Filippos_K
    5
    Filippos_K

    I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Theoκ
    2
    Theoκ

    Average quality. Its color is quite transparent for PLA. In texture and appearance, it resembles something between PLA and PETG, but that didn't bother me much since I used it for prints on figures and toys for my little one...

    The serious issue is with the winding. Just like the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and stuck on the edges of the spool, resulting in breakage.
    Unacceptable, I will definitely not prefer it again. Half of the spool and many prints ended up in the trash. Unsuitable, it can hardly be used and may cause some damage, it even caused the filament dryer to fall twice...
    Fortunately, it broke and the dryer didn't fall from the shelf to the floor.

    Translated from Greek ·
    2
  • See all

Description & Specifications

This 3D printing filament is made from PLA, a material known for its ease of use and eco-friendliness. Ideal for a variety of applications, the filament has a diameter of 1.75 millimeters, ensuring it can be used with most 3D printers on the market.

The "Pink" shade it features adds a beautiful and vibrant aesthetic to any project you create. The filament weight is 1 kilogram, providing a sufficient amount for many prints.

  • Material: PLA, environmentally friendly
  • Diameter: 1.75 millimeters, compatible with most printers
  • Color: Pink, ideal for creative and playful projects
  • Weight: 1 kilogram, offering enough quantity for a variety of prints

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
FPL-OA0016
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Pink
Diameter
1.75 mm
Weight
1 kg
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (29)

4.0
29
4.0
Review this product
  1. 16
  2. 2
  3. 7
  4. 3
  5. 1
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • John_Lafa
    2
    John_Lafa

    One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • sam230178
    5
    sam230178

    The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • o_uperkatanalwths
    5
    o_uperkatanalwths

    Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • Filippos_K
    5
    Filippos_K

    I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Theoκ
    2
    Theoκ

    Average quality. Its color is quite transparent for PLA. In texture and appearance, it resembles something between PLA and PETG, but that didn't bother me much since I used it for prints on figures and toys for my little one...

    The serious issue is with the winding. Just like the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and stuck on the edges of the spool, resulting in breakage.
    Unacceptable, I will definitely not prefer it again. Half of the spool and many prints ended up in the trash. Unsuitable, it can hardly be used and may cause some damage, it even caused the filament dryer to fall twice...
    Fortunately, it broke and the dryer didn't fall from the shelf to the floor.

    Translated from Greek ·
    2
  • See all