APPLICATION

SURFACE PREPARATION

• To ensure proper adhesion, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold residues, or moisture.
• For new or porous surfaces, first apply the corresponding recommended primer of the product.
• Apply the product in 2 coats, which should be spaced 1 - 2 hours apart.
• The product achieves all its mechanical strengths after 20 - 30 days.

APPLICATION CONDITIONS

• Avoid application at temperatures below 6°C and above 40°C and when relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS

• Brush
• Roller
• Paint sprayer

During work, keep the tools "wet" inside the container. Wipe the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of wash liquids into the groundwater.

CAUTION: Wear protective gloves, protective clothing, and personal protective equipment for the eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.

COVERAGE: 8-10m² / Lt per coat

DILUTION: First coat: 15% water. Second coat: 5-10% water

DRYING TIME: 1 - 2 hours depending on application conditions