Skroutz.mt

PrimaCreator Value UV / DLP Resin for 3D Printer Skin 500ml (PV-RESIN-B405-0500-SK)
3D Printer Resin

PrimaCreator Value UV / DLP Resin for 3D Printer Skin 500ml (PV-RESIN-B405-0500-SK)

PrimaCreator Value UV / DLP resin for UV-LED and DLP 3D printers cures at a wavelength of 395–405 nm and supports the creation of prints with detailed structures and surfaces. Fast curing allows for...

PrimaCreator Value UV / DLP resin for UV-LED and DLP 3D printers cures at a wavelength of 395–405 nm and supports the creation of prints with detailed structures and surfaces. Fast curing allows for short exposure times, while odour and evaporation are limited.

After printing, the objects are rinsed with isopropyl alcohol (IPA) to remove excess resin and...

See full description See full description
16 12 €
Delivery by Wed, 11 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (39)
4.9 (39 reviews)
Greece
2 pieces
See Printer Supplies on the page of Top Electronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

PrimaCreator Value UV / DLP resin for UV-LED and DLP 3D printers cures at a wavelength of 395–405 nm and supports the creation of prints with detailed structures and surfaces. Fast curing allows for short exposure times, while odour and evaporation are limited.

After printing, the objects are rinsed with isopropyl alcohol (IPA) to remove excess resin and then fully cured in a UV chamber or in sunlight. Full curing can take approximately 2–5 minutes in a UV chamber and 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes.

  • Printer type: UV-LED and DLP
  • Curing wavelength: 395–405 nm
  • Colour: Beige
  • Volume: 500 ml
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage: Keep protected from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Compatibility
PrimaCreator
Colour
Beige
Capacity
500 ml
Resin Type
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PrimaCreator Value UV / DLP resin for UV-LED and DLP 3D printers cures at a wavelength of 395–405 nm and supports the creation of prints with detailed structures and surfaces. Fast curing allows for short exposure times, while odour and evaporation are limited.

After printing, the objects are rinsed with isopropyl alcohol (IPA) to remove excess resin and then fully cured in a UV chamber or in sunlight. Full curing can take approximately 2–5 minutes in a UV chamber and 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes.

  • Printer type: UV-LED and DLP
  • Curing wavelength: 395–405 nm
  • Colour: Beige
  • Volume: 500 ml
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage: Keep protected from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
Compatibility
PrimaCreator
Colour
Beige
Capacity
500 ml
Resin Type
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

16,12 €
14,00 €   shipping cost