Skroutz.mt

Benning Digital Clamp Meter 600A AC CM 10-PV True RMS Maximum Jaw Opening 37mm
Clamp Meters

Benning Digital Clamp Meter 600A AC CM 10-PV True RMS Maximum Jaw Opening 37mm

The Benning CM 10-PV digital clamp meter measures AC current up to 600 A and uses True RMS. It features an INRUSH function for measuring starting currents, an HFR low-pass filter for inverter motors,...

The Benning CM 10-PV digital clamp meter measures AC current up to 600 A and uses True RMS. It features an INRUSH function for measuring starting currents, an HFR low-pass filter for inverter motors, and Bluetooth Low Energy 4.0. Using the BENNING MM-CM app, measured values can be retrieved, stored and shared from a smartphone or tablet.

The display is...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Benning CM 10-PV digital clamp meter measures AC current up to 600 A and uses True RMS. It features an INRUSH function for measuring starting currents, an HFR low-pass filter for inverter motors, and Bluetooth Low Energy 4.0. Using the BENNING MM-CM app, measured values can be retrieved, stored and shared from a smartphone or tablet.

The display is backlit, and the LED light illuminates the measurement point. HOLD, MIN/MAX and ZERO functions further enhance its capabilities, along with a data logger that stores up to 4,000 readings at recording intervals of 1–60 s. The SoftGrip housing is non-slip and impact-resistant.

  • Display type: Digital
  • AC current measurement: Up to 600 A
  • True RMS: Yes
  • Bluetooth: Yes
  • Maximum jaw opening: 37 mm
  • Starting current measurement (INRUSH): Yes
  • Temperature measurement: Yes
  • Capacitance measurement: Yes
  • Safety category: CAT IV
  • AC voltage measurement: 0.1 V–1,000 V, up to 1,500 V with the TA PV adapter
  • DC voltage measurement: 0.1 mV–1,000 V, up to 2,000 V with the TA PV adapter
  • AC/DC current measurement: 0.1 μA–4,000 μA and 10 mA–600 A
  • Resistance measurement: 0.1 Ω–600 kΩ
  • Continuity test: Yes
  • Diode test: Yes
  • Frequency measurement: 0.01 Hz–10 kHz
  • Capacitance measurement: 0.1 μF–1 mF
  • Temperature measurement range: -40 °C to +400 °C
  • HFR low-pass filter: 800 kHz
  • Data logging memory: Up to 4,000 readings
  • Recording interval: 1–60 s
  • App: BENNING MM-CM for iOS and Android
  • Accuracy: 1%
  • Display: 6,000-count, backlit
  • Housing: SoftGrip, non-slip and impact-resistant

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Maximum Jaw Opening
37 mm

Maximum Jaw Opening

The maximum cable or conductor diameter that the clamp can grip in order to perform a measurement.
with Test Leads
No
AC Current
600 A
Indication
Digital
Bluetooth
Yes
Safety Category
CAT IV
ISO/NIST Calibration Certificate
No

Features & Functions

Inrush Current
Yes

Inrush Current

Ability to record the instantaneous inrush current (duration ~100ms) absorbed by electric motors, motor-driven devices, and compressors during their momentary startup.
True RMS
Yes

True RMS


The True-RMS method will provide the correct value of the alternating quantity regardless of its waveform.
NCV
No
LoZ (Low Impedance / Low Impedance)
-

LoZ (Low Impedance / Low Impedance)

Low impedance function that absorbs induced/parasitic voltages ("phantom" voltages or ghost voltages) from adjacent cables, ensuring that you measure only the actual line voltage.
VFD Mode / LPF (Low Pass Filter)
-

VFD Mode / LPF (Low Pass Filter)

Integrated low-pass filter that cuts off high-frequency harmonic noise (PWM) produced by variable speed drives, allowing accurate voltage and frequency measurement in Inverters.
Temperature Measurement
Yes

Temperature Measurement

Ability to measure temperature via a connected thermocouple (Type-K terminal), allowing temperature monitoring of pipes, refrigerants, and HVAC components.
Capacitor Capacitance Measurement
Yes

Capacitor Capacitance Measurement

Ability to test and measure capacitor capacitance, allowing the immediate diagnosis of worn starting capacitors in motors, pumps, and compressors.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.151,90 €
14,00 €   shipping cost