Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
I installed it myself, along with the "contact" sensor it has so it knows when the door is closed.
Unfortunately, neither the application recommended by the instructions nor Google Home—where I successfully added it and it works fine—have the ability to "read" the status of the door, whether it is open or closed.. they do not have this menu at all, that is, the recommended application suggests I install a camera to see if the door is closed!
το εγκατέστησα μόνος, μαζί με την "επαφή" που έχει για να ξέρει πότε είναι κλειστή η πόρτα.
δυστυχώς ούτε το application που προτείνουν οι οδηγίες, ούτε το Google home -όπου το προσέθεσα επιτυχώς και δουλεύει κανονικά- έχουν τη δυνατοτητα να "διαβάσουν" την κατάσταση της πόρτας, αν είναι ανοιχτή ή κλειστή.. δεν έχουν καθόλου αυτό το μενού, δηλαδή το προτεινόμενο application μου προτείνει να βάλω κάμερα για να δω αν έκλεισε η πόρτα!
Unfortunately, it is a piece of junk that never worked.
Apart from that, for the magnetic contacts, it doesn't have a cable and you have to add one yourself.
Prefer the ANDOWL which connects in seconds and has a shielded cable for the magnetic contacts
Δυστυχώς είναι ένα σκουπίδι που δεν δούλεψε ποτέ.
εκτός αυτού για τις μαγνητικές επαφές δεν έχει καλώδιο και πρέπει να προσθέσεις εσύ.
προτίμησε το ANDOWL που συνδέεται σε δευτερόλεπτα και έχει καλώδιο θωρακισμένο για τις μαγνητικές επαφές
Very careful to anyone who buys it! NEVER upgrade the firmware. If it is upgraded to 3.7.0 and 3.7.3 then it has a huge problem. With a double tap on the magnetic contact, it gives a command and opens or closes the door. It moves, in other words. It has been a month and I haven't seen any response to the report I made.
Πολυ προσοχη σε οποιον το παρει! ΠΟΤΕ μην αναβαθμισει το firmware. Αν αναβαθμιστει στο 3,7,0 και 3,7,3 τοτε εχει ενα τεραστιο προβλημα. Με ενα double tap στην μαγνητικη επαφη, δινει εντολη και ανοιγει ή κλεινει η πόρτα. Κάνει κίνηση δηλαδή. Εχει περάσει ένας μηνας, δεν εχω δει ανταπόκριση στην αναφορά που έχω κάνει.
I installed it myself, along with the "contact" sensor it has so it knows when the door is closed.
Unfortunately, neither the application recommended by the instructions nor Google Home—where I successfully added it and it works fine—have the ability to "read" the status of the door, whether it is open or closed.. they do not have this menu at all, that is, the recommended application suggests I install a camera to see if the door is closed!
το εγκατέστησα μόνος, μαζί με την "επαφή" που έχει για να ξέρει πότε είναι κλειστή η πόρτα.
δυστυχώς ούτε το application που προτείνουν οι οδηγίες, ούτε το Google home -όπου το προσέθεσα επιτυχώς και δουλεύει κανονικά- έχουν τη δυνατοτητα να "διαβάσουν" την κατάσταση της πόρτας, αν είναι ανοιχτή ή κλειστή.. δεν έχουν καθόλου αυτό το μενού, δηλαδή το προτεινόμενο application μου προτείνει να βάλω κάμερα για να δω αν έκλεισε η πόρτα!
Unfortunately, it is a piece of junk that never worked.
Apart from that, for the magnetic contacts, it doesn't have a cable and you have to add one yourself.
Prefer the ANDOWL which connects in seconds and has a shielded cable for the magnetic contacts
Δυστυχώς είναι ένα σκουπίδι που δεν δούλεψε ποτέ.
εκτός αυτού για τις μαγνητικές επαφές δεν έχει καλώδιο και πρέπει να προσθέσεις εσύ.
προτίμησε το ANDOWL που συνδέεται σε δευτερόλεπτα και έχει καλώδιο θωρακισμένο για τις μαγνητικές επαφές
Very careful to anyone who buys it! NEVER upgrade the firmware. If it is upgraded to 3.7.0 and 3.7.3 then it has a huge problem. With a double tap on the magnetic contact, it gives a command and opens or closes the door. It moves, in other words. It has been a month and I haven't seen any response to the report I made.
Πολυ προσοχη σε οποιον το παρει! ΠΟΤΕ μην αναβαθμισει το firmware. Αν αναβαθμιστει στο 3,7,0 και 3,7,3 τοτε εχει ενα τεραστιο προβλημα. Με ενα double tap στην μαγνητικη επαφη, δινει εντολη και ανοιγει ή κλεινει η πόρτα. Κάνει κίνηση δηλαδή. Εχει περάσει ένας μηνας, δεν εχω δει ανταπόκριση στην αναφορά που έχω κάνει.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
I installed it myself, along with the "contact" sensor it has so it knows when the door is closed.
Unfortunately, neither the application recommended by the instructions nor Google Home—where I successfully added it and it works fine—have the ability to "read" the status of the door, whether it is open or closed.. they do not have this menu at all, that is, the recommended application suggests I install a camera to see if the door is closed!
το εγκατέστησα μόνος, μαζί με την "επαφή" που έχει για να ξέρει πότε είναι κλειστή η πόρτα.
δυστυχώς ούτε το application που προτείνουν οι οδηγίες, ούτε το Google home -όπου το προσέθεσα επιτυχώς και δουλεύει κανονικά- έχουν τη δυνατοτητα να "διαβάσουν" την κατάσταση της πόρτας, αν είναι ανοιχτή ή κλειστή.. δεν έχουν καθόλου αυτό το μενού, δηλαδή το προτεινόμενο application μου προτείνει να βάλω κάμερα για να δω αν έκλεισε η πόρτα!
Unfortunately, it is a piece of junk that never worked.
Apart from that, for the magnetic contacts, it doesn't have a cable and you have to add one yourself.
Prefer the ANDOWL which connects in seconds and has a shielded cable for the magnetic contacts
Δυστυχώς είναι ένα σκουπίδι που δεν δούλεψε ποτέ.
εκτός αυτού για τις μαγνητικές επαφές δεν έχει καλώδιο και πρέπει να προσθέσεις εσύ.
προτίμησε το ANDOWL που συνδέεται σε δευτερόλεπτα και έχει καλώδιο θωρακισμένο για τις μαγνητικές επαφές
Very careful to anyone who buys it! NEVER upgrade the firmware. If it is upgraded to 3.7.0 and 3.7.3 then it has a huge problem. With a double tap on the magnetic contact, it gives a command and opens or closes the door. It moves, in other words. It has been a month and I haven't seen any response to the report I made.
Πολυ προσοχη σε οποιον το παρει! ΠΟΤΕ μην αναβαθμισει το firmware. Αν αναβαθμιστει στο 3,7,0 και 3,7,3 τοτε εχει ενα τεραστιο προβλημα. Με ενα double tap στην μαγνητικη επαφη, δινει εντολη και ανοιγει ή κλεινει η πόρτα. Κάνει κίνηση δηλαδή. Εχει περάσει ένας μηνας, δεν εχω δει ανταπόκριση στην αναφορά που έχω κάνει.
I installed it myself, along with the "contact" sensor it has so it knows when the door is closed.
Unfortunately, neither the application recommended by the instructions nor Google Home—where I successfully added it and it works fine—have the ability to "read" the status of the door, whether it is open or closed.. they do not have this menu at all, that is, the recommended application suggests I install a camera to see if the door is closed!
το εγκατέστησα μόνος, μαζί με την "επαφή" που έχει για να ξέρει πότε είναι κλειστή η πόρτα.
δυστυχώς ούτε το application που προτείνουν οι οδηγίες, ούτε το Google home -όπου το προσέθεσα επιτυχώς και δουλεύει κανονικά- έχουν τη δυνατοτητα να "διαβάσουν" την κατάσταση της πόρτας, αν είναι ανοιχτή ή κλειστή.. δεν έχουν καθόλου αυτό το μενού, δηλαδή το προτεινόμενο application μου προτείνει να βάλω κάμερα για να δω αν έκλεισε η πόρτα!
Unfortunately, it is a piece of junk that never worked.
Apart from that, for the magnetic contacts, it doesn't have a cable and you have to add one yourself.
Prefer the ANDOWL which connects in seconds and has a shielded cable for the magnetic contacts
Δυστυχώς είναι ένα σκουπίδι που δεν δούλεψε ποτέ.
εκτός αυτού για τις μαγνητικές επαφές δεν έχει καλώδιο και πρέπει να προσθέσεις εσύ.
προτίμησε το ANDOWL που συνδέεται σε δευτερόλεπτα και έχει καλώδιο θωρακισμένο για τις μαγνητικές επαφές
Very careful to anyone who buys it! NEVER upgrade the firmware. If it is upgraded to 3.7.0 and 3.7.3 then it has a huge problem. With a double tap on the magnetic contact, it gives a command and opens or closes the door. It moves, in other words. It has been a month and I haven't seen any response to the report I made.
Πολυ προσοχη σε οποιον το παρει! ΠΟΤΕ μην αναβαθμισει το firmware. Αν αναβαθμιστει στο 3,7,0 και 3,7,3 τοτε εχει ενα τεραστιο προβλημα. Με ενα double tap στην μαγνητικη επαφη, δινει εντολη και ανοιγει ή κλεινει η πόρτα. Κάνει κίνηση δηλαδή. Εχει περάσει ένας μηνας, δεν εχω δει ανταπόκριση στην αναφορά που έχω κάνει.