Skroutz.mt

Flex OSE 2-80 EC Electric Pulse Sander 260W with Speed Control and with Suction System 468932
Sanders

Flex OSE 2-80 EC Electric Pulse Sander 260W with Speed Control and with Suction System 468932 Code: 468932

Technical Specifications

  • No-load speed: 660 - 1500 1 rpm
  • Power consumption: 260 W
  • Voltage: 230 V
  • Frequency: 50/60Hz
  • Stroke: 2.0 mm
  • Pad support length: 130 mm
  • Pad support width: 80 mm
  • Idle stroke...

Technical Specifications

  • No-load speed: 660 - 1500 1 rpm
  • Power consumption: 260 W
  • Voltage: 230 V
  • Frequency: 50/60Hz
  • Stroke: 2.0 mm
  • Pad support length: 130 mm
  • Pad support width: 80 mm
  • Idle stroke speed: 8000 - 12000 1 rpm
  • No-load speed: 16000 - 24000 1 rpm
  • Dust extraction connection diameter: Ø 27
  • Cable length: 4.0 m
  • Dimensions LxWxH: 163 x 90 x 121 mm
  • ...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1200 gr
  • See all
Review the product
Product report

Description

Description

Technical Specifications

  • No-load speed: 660 - 1500 1 rpm
  • Power consumption: 260 W
  • Voltage: 230 V
  • Frequency: 50/60Hz
  • Stroke: 2.0 mm
  • Pad support length: 130 mm
  • Pad support width: 80 mm
  • Idle stroke speed: 8000 - 12000 1 rpm
  • No-load speed: 16000 - 24000 1 rpm
  • Dust extraction connection diameter: Ø 27
  • Cable length: 4.0 m
  • Dimensions LxWxH: 163 x 90 x 121 mm
  • Weight: 1.2 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
468932

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
260 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1200 gr
Cable Length
4 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
24000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
130x80 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications

  • No-load speed: 660 - 1500 1 rpm
  • Power consumption: 260 W
  • Voltage: 230 V
  • Frequency: 50/60Hz
  • Stroke: 2.0 mm
  • Pad support length: 130 mm
  • Pad support width: 80 mm
  • Idle stroke speed: 8000 - 12000 1 rpm
  • No-load speed: 16000 - 24000 1 rpm
  • Dust extraction connection diameter: Ø 27
  • Cable length: 4.0 m
  • Dimensions LxWxH: 163 x 90 x 121 mm
  • Weight: 1.2 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
468932

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
260 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1200 gr
Cable Length
4 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
24000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
130x80 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

226,50 €
14,00 €   shipping cost