Skroutz.mt

DBO380Z Pulse Sander 18V Solo with Speed Setting and Dust Suction System
Sanders

DBO380Z Pulse Sander 18V Solo with Speed Setting and Dust Suction System

The Makita DBO380Z orbital sander is designed for sanding large surfaces with a rectangular base. It runs on an 18 V battery and features a brushless motor, speed control, and a dust extraction system...

The Makita DBO380Z orbital sander is designed for sanding large surfaces with a rectangular base. It runs on an 18 V battery and features a brushless motor, speed control, and a dust extraction system for collecting debris during operation.

  • Type: Orbital sander
  • Power supply: Battery-powered
  • Voltage: 18 V
  • Power: 200
  • Brushless motor: Yes
  • Dust extraction...
See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.
  • Number of Batteries 0
  • Ah 1.3 Ah

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Brushless

    Motor without brushes, offering greater autonomy and longer lifespan.
  • Weight (Net) 1900 gr
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Makita DBO380Z orbital sander is designed for sanding large surfaces with a rectangular base. It runs on an 18 V battery and features a brushless motor, speed control, and a dust extraction system for collecting debris during operation.

  • Type: Orbital sander
  • Power supply: Battery-powered
  • Voltage: 18 V
  • Power: 200
  • Brushless motor: Yes
  • Dust extraction system: Yes
  • Speed control: Yes
  • Belt length: 93
  • Belt width: 93
  • Diameter: 93
  • Speed: 12000
  • Orbit diameter: 2

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1900 gr
Weight (with Battery)
2200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Battery Specifications

Number of Batteries
0
Volt
18 V
Ah
1.3 Ah

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
72 dB
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
93 mm
Sand Belt Length
93 mm
Sand Belt Width (min)
93 mm
Sand Belt Width (max)
93 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Makita DBO380Z orbital sander is designed for sanding large surfaces with a rectangular base. It runs on an 18 V battery and features a brushless motor, speed control, and a dust extraction system for collecting debris during operation.

  • Type: Orbital sander
  • Power supply: Battery-powered
  • Voltage: 18 V
  • Power: 200
  • Brushless motor: Yes
  • Dust extraction system: Yes
  • Speed control: Yes
  • Belt length: 93
  • Belt width: 93
  • Diameter: 93
  • Speed: 12000
  • Orbit diameter: 2

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Oscillation Range
2 mm

Oscillation Range: 2

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
1900 gr
Weight (with Battery)
2200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Battery Specifications

Number of Batteries
0
Volt
18 V
Ah
1.3 Ah

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
72 dB
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
93 mm
Sand Belt Length
93 mm
Sand Belt Width (min)
93 mm
Sand Belt Width (max)
93 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Makita