Skroutz.mt

MikroTik RB912UAG-5HPnD-OUT Access Point Wi‑Fi 4 Single Band (5GHz) for Outdoor Placement
Access Points

MikroTik RB912UAG-5HPnD-OUT Access Point Wi‑Fi 4 Single Band (5GHz) for Outdoor Placement

The MikroTik RB912UAG-5HPnD-OUT access point is designed for outdoor installation. Its enclosure has two SMA antenna connectors and a cable cover to protect against moisture. On the underside, behind...

The MikroTik RB912UAG-5HPnD-OUT access point is designed for outdoor installation. Its enclosure has two SMA antenna connectors and a cable cover to protect against moisture. On the underside, behind a protective cover, are the USB port, Ethernet port, and grounding cable outlet. The enclosure can be opened with one hand and includes a loop for mounting on a...

See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (5GHz)

    An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.

  • Wi-Fi Generation

    Wi‑Fi 4

    Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

    For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
  • See all
95 79 €
Delivery Wed, 18 Nov - Fri, 20 Nov
14,00 €   shipping cost
Sent from Greece
From ΝΕTCORE
Greece
5 pieces
See Networking on the page of ΝΕTCORE

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The MikroTik RB912UAG-5HPnD-OUT access point is designed for outdoor installation. Its enclosure has two SMA antenna connectors and a cable cover to protect against moisture. On the underside, behind a protective cover, are the USB port, Ethernet port, and grounding cable outlet. The enclosure can be opened with one hand and includes a loop for mounting on a tower or mast, as well as a separate DIN rail mount.

It supports 5 GHz Wi-Fi 4, with a maximum WLAN speed of 300 Mbps and 2x2 MIMO technology. It has a miniPCIe expansion slot, three additional antenna connector positions, and LED signal strength indicators. PoE power makes installation easier.

  • Mounting: Outdoor
  • Frequency: Single band (5 GHz)
  • Wi-Fi generation: Wi-Fi 4
  • Networking standards: 802.11a, 802.11 b/g/n
  • Maximum WLAN speed: 300 Mbps
  • MIMO technology: 2x2
  • Maximum transmit power: 30 dBm
  • Ethernet ports: 1
  • LAN speed: 1000 Mbps
  • USB connectivity: 1 USB interface
  • Expansion slot: miniPCIe
  • Antenna connectors: 2 SMA
  • Additional antenna connector positions: 3
  • Indicators: Signal strength LEDs
  • PoE support: Yes
  • Mounting: Loop for a tower or mast and DIN rail mount
  • Package contents: PoE injector and power supply
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The MikroTik RB912UAG-5HPnD-OUT access point is designed for outdoor installation. Its enclosure has two SMA antenna connectors and a cable cover to protect against moisture. On the underside, behind a protective cover, are the USB port, Ethernet port, and grounding cable outlet. The enclosure can be opened with one hand and includes a loop for mounting on a tower or mast, as well as a separate DIN rail mount.

It supports 5 GHz Wi-Fi 4, with a maximum WLAN speed of 300 Mbps and 2x2 MIMO technology. It has a miniPCIe expansion slot, three additional antenna connector positions, and LED signal strength indicators. PoE power makes installation easier.

  • Mounting: Outdoor
  • Frequency: Single band (5 GHz)
  • Wi-Fi generation: Wi-Fi 4
  • Networking standards: 802.11a, 802.11 b/g/n
  • Maximum WLAN speed: 300 Mbps
  • MIMO technology: 2x2
  • Maximum transmit power: 30 dBm
  • Ethernet ports: 1
  • LAN speed: 1000 Mbps
  • USB connectivity: 1 USB interface
  • Expansion slot: miniPCIe
  • Antenna connectors: 2 SMA
  • Additional antenna connector positions: 3
  • Indicators: Signal strength LEDs
  • PoE support: Yes
  • Mounting: Loop for a tower or mast and DIN rail mount
  • Package contents: PoE injector and power supply
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

95,79 €
14,00 €   shipping cost