Skroutz.mt

Einhell GE-SP 18 LL Li - Solo Pump Waste Water / Sewage 18V 4181560
Submersible Water Pumps

Einhell GE-SP 18 LL Li - Solo Pump Waste Water / Sewage 18V 4181560

Technical Specifications

  • Battery voltage: PXC 18 V
  • Maximum flow rate: 4500 lit/h
  • Manometric: 8 m
  • Maximum suction depth: 4 m
  • Suction up to: 1 mm
  • Discharge hose connection: 33.3 mm (1") OUT
  • Cable...

Technical Specifications

  • Battery voltage: PXC 18 V
  • Maximum flow rate: 4500 lit/h
  • Manometric: 8 m
  • Maximum suction depth: 4 m
  • Suction up to: 1 mm
  • Discharge hose connection: 33.3 mm (1") OUT
  • Cable length: 5 m
  • Net weight: 2.2 kg (without battery)
  • Battery box
  • Cable winding
  • Wall mount
  • Stainless steel brackets
See full description See full description

  • Voltage

    18V

    It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Technical Specifications

  • Battery voltage: PXC 18 V
  • Maximum flow rate: 4500 lit/h
  • Manometric: 8 m
  • Maximum suction depth: 4 m
  • Suction up to: 1 mm
  • Discharge hose connection: 33.3 mm (1") OUT
  • Cable length: 5 m
  • Net weight: 2.2 kg (without battery)
  • Battery box
  • Cable winding
  • Wall mount
  • Stainless steel brackets

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Voltage
18V

Voltage

18V

It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
4 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications

  • Battery voltage: PXC 18 V
  • Maximum flow rate: 4500 lit/h
  • Manometric: 8 m
  • Maximum suction depth: 4 m
  • Suction up to: 1 mm
  • Discharge hose connection: 33.3 mm (1") OUT
  • Cable length: 5 m
  • Net weight: 2.2 kg (without battery)
  • Battery box
  • Cable winding
  • Wall mount
  • Stainless steel brackets

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Voltage
18V

Voltage

18V

It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
4 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.