The Wanhao UV-DLP resin is particularly suitable for processing in 3D DLP and UV LED printers. The two 3D printing technologies use UV light sources. These sources polymerize the liquid resin through a chemical reaction with the action of UV light at a wavelength of 405 nanometers. The high-energy UV light initiates the photopolymerization of the liquid material, converting the resin from a liquid to a solid state. This process is repeated layer by layer until the printing of the object is complete.

Material features of Wanhao resin:

• Polymerized by UV light with a wavelength of 405 nm
• High-energy UV light source for curing DLP and UV LED resin
• Rapid polymerization process due to optimized resin
• Designed for use in Wanhao DLP and UV LED 3D printers

This resin can be processed in almost all 3D DLP and UV LED printers; however, it is optimized for use in Wanhao printers.

Tips for optimal 3D printing results with Wanhao DLP resin:

• Clean your items in an isopropyl alcohol bath after printing is complete.
• Leave your parts in isopropyl alcohol for about 10 minutes to remove excess resin.
• Then, let the items air dry.
• Allow the dried item to cure under UV light until its final strength is achieved.
• For a UV light source, you can use UV LEDs or sunlight.

When the object has reached its final hardness, it has a smooth and beautiful surface.

Storage information:

• Store in a dry, dark, and cool place.
• Exposure time for material curing: 8 – 16 seconds.
• Total solid content: 65.0% - 66.0% (testing temperature: 105 °C).
• Molecular weight: 1000-30000.