Wanhao Standard red resin is designed for printing with DLP and UV-LED 3D printers that use ultraviolet light with a wavelength of 405 nm. The liquid material cures and solidifies when exposed to light, layer by layer, and its formulation is optimized for fast curing.

After printing, clean the object in isopropyl alcohol for approximately 10 minutes and leave it to air-dry. Then cure it under ultraviolet light, such as UV LED or sunlight, until it reaches its final hardness. Store the resin in a cool, dark, and dry place.

• Resin type: Standard
• Compatibility: DLP and UV-LED 3D printers; optimized for Wanhao printers
• Color: Red
• Capacity: 500 ml
• Wavelength: 405 nm
• Exposure time: 8–16 s
• Viscosity at 25 °C: 120–140 mPa·s
• Density at 25 °C: 1.12 g/cm³
• Layer curing depth: 0.1 mm
• Storage temperature: 8–28 °C
• Shelf life: 12 months
• Horizontal hardness: 79.2
• Horizontal flexural strength: 8.43 MPa
• Horizontal tensile strength: 21.4 MPa
• Vertical hardness: 73.5
• Vertical flexural strength: 5.57 MPa
• Vertical tensile strength: 15.2 MPa
• Solids content: 65–66% at 105 °C