The essential kit for repairs of all types. The polyurethane adhesive Seam Grip® provides a clear and flexible finish, suitable for permanent waterproof repairs to holes, tears, or seams in most types of camping gear, such as:

• tents
• tarps
• groundsheets
• backpacks
• shoes
• gloves
• inflatable mattresses & toys
• dry bags
• ski clothing
• other waterproof clothing
• neck and wrist seals
• kites

Instructions: Preparation: Clean and dry the area to be repaired. Roughen the surface. Holes and tears: Create support from adhesive tape. Fill the gap and the area 6mm around it. Keep the area horizontal and still. Remove the tape after the “curing” is complete (8-12 hours). Patch application: Apply Seam Grip® and then place the patch over the damaged area. Wipe away excess at the edges. The item can be used immediately. High-stress areas: Apply a thin layer of Seam Grip® to the area. Seams: Apply Seam Grip® to the inside of the seam. Use a brush or apply a thin layer directly from the tube. Seam Grip® drying time: Wait 8 to 12 hours. Check before use. Uncured Seam Grip® may stick to clothing or other items. Patch drying time: In many cases, if the patch is used on fabric, the item can be used immediately. Check patches regularly.