For its price, it's good, although it has very poor quality screws and the instructions are very brief and not explanatory at all. I assembled it myself but I would suggest it be done by 2 people.

Corresponds to its value, when the second monitor was placed on top it broke at the weld on the base. It was returned.

One-way choice when it comes to selecting a monitor stand. At this price, it offers you quality and comfort, or more simply, exactly what you're looking for to save space on your desk. Easy assembly (ideally with 2 people) and something very important is that it holds the monitors very steadily. I've had it for 3 months and even though I made a modification and changed the part you twist to tighten because it didn't fit on my desk, the monitors don't move at all. The only small issue is the one others mention and you can see in my picture with the height difference between the two monitors, which can be fixed but it doesn't bother me enough to do it.

The stand as I received it with the screws it comes with is not functional, firstly because they are very flimsy and secondly, as soon as you tighten them a bit more for safety, they get stripped immediately. I also suggest changing the screws and washers right away before you even bother tightening them because afterwards it is difficult to remove them. (I used a Dremel on the screws.) In general, I replaced all of them, both small and large, for safety reasons. I made two extra holes where the stand tightens and holds because I have two 27' gaming monitors which are quite expensive. As a product, the stand seems good and sturdy. For its price, it is okay, but if it had proper screws from the start, it would be even better.

I have changed my setup 3 or 4 times with other monitors, heavier, smaller. Now I have two 27-inch curved ones. It holds up quite well!

It is good, I with the Botton mount was larger, my table is very weird, otherwise it should fit well with any normal desk.

Even if screens within the weight limit are used, it is relatively unstable, and with every movement at the desk, the screens move a lot; sometimes I am afraid they might fall or hit the desk and break. However, so far nothing has happened so...

It holds 2x24" DELL just fine without any problem, nor with the sense that something could happen. No complaints, it does exactly what it should. Worth it 100%

Excellent product. Easy to install and sturdy. It holds a 24 and a 23 inch monitor. Very convenient for those who work with two monitors

Sturdy construction. I hung 2 x 24 and it is as it should be. It has tilt adjustment and left-right adjustment. HOWEVER, it does NOT have independent height adjustment. That is, if you adjust the height, both monitors are affected.

Sturdy construction. Difficult assembly because one of the three holes at the base was smaller compared to the screws that come in the package. As a result, I had to find another one of my own, with considerable difficulty, as I had to apply a lot of pressure to get the screw through the base. Maybe I got a defective batch. Even with considerable difficulty, however, the job was done.

Two curved monitors were mounted, one 27-inch and one 24-inch. It takes quite a while to find the distances that suit each person, which is indeed tiring, but it's also good because the arms are strong and give a lot of leeway to place them as you prefer. Good cable management, good screwing on a desk 120 cm long.

Important note: the sockets that allow each screen to tilt up or down need a lot of tightening. This is because they also control the rotation of the screen. And if they are not tightened enough, you will have a "rotating" screen!

I give it 5 stars because it is very cheap and worth the money. Of course, it doesn't work for me as I have a heavy main monitor and then a lighter second one on the other side. Due to the weight and the mediocre quality of my desk, the stand cracked and opened a small hole underneath the desk (since the desk is one of those that looks like cardboard inside). Generally, be careful about this when buying a monitor stand. The opinion for the 5 stars is objective and not subjective as a friend of mine has the same model and it works perfectly for him!

It is sturdy, I set it up easily, I would like it to have a slightly taller neck, so that the screens are a little higher

At its price, and for what it offers (2 monitors, sturdy construction, simultaneous height adjustment for both monitors, ease of placement), it is the most value for money you can find. I got it for 2 24" monitors at €23, and it opened up space on the desk, and the cables fit nicely into the clips!

I would like there to be a separate height adjustment for each screen, which does not exist. Other than that, it's fine.

Purchased just 2 days ago. I have placed 2 27’’ monitors on it. It seems to be quite a sturdy construction and easy to set up.

Very good stand, very stable with two 27' monitors that you can adjust each one as it suits you. I found a very good solution to save space on the desk.

Good price but a big minus is the lack of height adjustment. Also, the arms are quite large, so for the screens to come side by side, they need to be quite far from the base

Value for money product, stable in terms of screens and good grip when holding it on the desk. Keep in mind that screens smaller than 27 inches leave a gap in between if they are not pushed far enough forward due to the design. It's not bothersome, but it's everyone's preference

It hooks very easily and securely on the desk, but if you put 2 monitors for some reason, when you even slightly shake the desk, the monitors go up and down. I tried to tighten all the screws of the construction better, but nothing! When I had one monitor, it didn't do that to me, it may be because one of my 2 monitors is old and quite bulky and heavy! Otherwise, very good quality construction

It does the job just fine.
Convenient cable organization.
The arms move forward and backward and open and close diagonally, while the screens rotate left and right. To change the tilt of the screens up and down, you have to adjust it with a screw that you unscrew by hand.
Pay attention to the thickness of your desk, read about the dimensions that the clamp that holds the desk fits.

A little difficult to put the monitor and adjust it so it doesn't turn or play. Otherwise, I have installed a 27-inch Xiaomi g27i monitor (mainly for gaming) and a 21.5 FHD with 2xHDMI to play on PC and work laptop from cosmodata for 39.99€ (refurbished).

It's worth it to put both and expand the space. It also has clips to gather cables so the mess doesn't show behind and below.

The only negative is that the screws are for large monitors and not portable (that's why I got a 21.5" recycled monitor, I had a 18.5" Portable from aliexpress 99€ FHD 144hz 1ms ips and the screws didn't fit. It didn't have small and large screws for deep and shallow screws so I got another monitor... It's a shame because the 18-inch was far superior to the refurbished one I wanted for spotify, discord, and anime/series, but also for work on the laptop...!

I had the IcyBox stand (IB-MS504-T, purchased for 100 euros) and it didn't suit me at all. I bought this particular stand for around 25 euros and found my happiness. I used 2 different 24-inch monitors and the stand also has the ability for fine tuning!

For the money, it is very sturdy and comfortably holds a 27-inch and a 22-inch monitor. The 22-inch one I have vertically and they sit perfectly!

I bought a 27-inch and a 24-inch very good base and stable for the money I bought it is super I would definitely recommend the product

For the money, it is good. Be careful to have the screens in the same size for there to be consistency, because the height is not adjustable automatically.

Excellent! Quality, fit, appearance, ease of installation, stable, adjustable, and with all the accessories. I put a 22-inch and a 28-inch! If you combine screens of different sizes and have a significant height difference, you can unscrew and reverse the arm of one of the two downward so that the difference decreases because its only drawback may be the lack of height adjustment for each screen separately.

Affordable and sturdy arm/base.
Does exactly what it advertises.

As for the cons, I would say that it is a bit difficult to screw the screen onto the base by yourself, it requires a second person for comfort.
However, the overall assembly of the base was simple and the slots for cable management are simple and convenient.

Note for those who didn't notice... the height is the same for both screens.
I have a 22-inch and a 24-inch and the height difference is noticeable, so be careful!
(It's not necessarily a negative, I'm just emphasizing it)

I have mounted 2 24" monitors. It is very sturdy as a stand and definitely worth its money. The only negative is that you cannot adjust the height of the screens. It is ideal to use the same type of monitors.