The Schneider Electric METSEPM5110 power meter measures and monitors electrical parameters and power quality up to the 15th harmonic. It features a backlit 128 × 128 pixel LCD and records the minimum and maximum instantaneous values with timestamps.
- Instrument type: Power meter
- Display: Digital, backlit 128 × 128 pixel LCD
- Installation: Flush-mounted in a panel door with a bezel
- Number of phases: Single-phase
- Connectivity: Modbus RTU and ASCII, JBUS, RS485
- Rated current: 1 A, 5 A
- Measuring current: 10–9000 mA
- Power supply: 100–415 V AC (45–65 Hz), 125–250 V DC
- Network frequency: 50 Hz, 60 Hz
- Poles: 1P + N, 3P, 3P + N
- Power consumption: 10 VA at 415 V
- Sampling: 64 samples per cycle
- Inputs: 0
- Outputs: 1 digital
- Active energy accuracy: ±2 %
- Reactive energy accuracy: ±0.5 %
- Active power accuracy: ±0.5 %
- Apparent power accuracy: ±0.5 %
- Frequency accuracy: ±0.05 %
- Power factor accuracy: ±0.005 %
- Current accuracy: ±0.5 %
- Voltage accuracy: ±0.5 %
- Active energy class: 0.5S according to IEC 62053-22
- Communication parameters: 2-wire, 9.6, 19.2 and 38.4 kbaud, even/odd or no parity
- Insulation: 2500 V
- Standards: IEC 60529, IEC 61557-12, IEC 62053-22, EN 50470-1, EN 50470-3, UL 61010-1, IEC 62053-24
- Certifications: CE according to IEC 61010-1, CULus according to UL 61010-1
- Protection rating: IP52 on the front, IP30 on the body according to IEC 60529
- Relative humidity: 5–95 % at 50 °C
- Pollution degree: 2
- Operating temperature: -25–70 °C
- Storage temperature: -40–85 °C
- Operating altitude: up to 2000 m
- Dimensions: 96 × 72 × 96 mm
- Weight: 380 g
Specifications
- Type
- Energy Analyzer
- Display Type
- Digital
- Installation Type
- Door / Recessed
- Number of Phases
- Single-phase
- Maximum Current
- 1 A
Smart Features
- Connectivity
- Modbus
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.