DSL Modems / Routers

X6 v1 Wireless Router Wi‑Fi 6 with 4 Gigabit Ports

The Cudy X6 v1 router uses Wi‑Fi 6 and OFDMA technology to connect more devices and reduce latency. Wi‑Fi speeds reach up to 1,201 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz, while beamforming...

The Cudy X6 v1 router uses Wi‑Fi 6 and OFDMA technology to connect more devices and reduce latency. Wi‑Fi speeds reach up to 1,201 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz, while beamforming directs the signal towards connected devices. Its four high-gain antennas and independent Front-End module help boost the signal.

The dual-core processor supports...

See full description See full description

Top specs

  • See all
53 10 €
Delivery by Wed, 25 Nov
14,00 €   shipping cost
Sent from Greece
From Yourpc 4.7 (51)
Greece
1 piece
See Networking on the page of Yourpc

Learn more about invoicing

Description

Description

The Cudy X6 v1 router uses Wi‑Fi 6 and OFDMA technology to connect more devices and reduce latency. Wi‑Fi speeds reach up to 1,201 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz, while beamforming directs the signal towards connected devices. Its four high-gain antennas and independent Front-End module help boost the signal.

The dual-core processor supports network operation, while the four Gigabit LAN ports and Gigabit WAN port provide wired connections. The router supports a VPN client, Dynamic DNS and WPA3 security, as well as parental controls and guest network management.

  • Type: Router
  • Wi‑Fi generation: Wi‑Fi 6
  • Wi‑Fi bands: Dual Band 2.4 GHz and 5 GHz
  • Maximum Wi‑Fi speed: 1,750 Mbps
  • Wi‑Fi speed on 5 GHz: Up to 1,201 Mbps
  • Wi‑Fi speed on 2.4 GHz: Up to 574 Mbps
  • Wi‑Fi standards: IEEE 802.11a/b/g/n/ac/ax
  • Wi‑Fi technologies: OFDMA, beamforming, BSS Color, WMM
  • Processor: Dual-core
  • Flash memory: 16 MB
  • DDR memory: 256 MB
  • Antennas: 4 fixed high-gain omnidirectional antennas
  • Ethernet LAN ports: 4 Gigabit, 10/100/1000 Mbps
  • Maximum LAN speed: 1,000 Mbps
  • WAN port: 1 Gigabit, 10/100/1000 Mbps
  • WAN connection types: Dynamic IP, Static IP, PPPoE
  • Wi‑Fi security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, WPA3
  • VPN client: PPTP, L2TP, OpenVPN, WireGuard, IPSec, Zerotier
  • Network management: Parental controls, 2.4 GHz and 5 GHz guest network, DHCP Server, DHCP Client list, address reservation, Dynamic DNS
  • NAT features: Port Forwarding, Port Triggering, UPnP, DMZ
  • Buttons: WPS, Reset
  • Power supply: 12 V / 1 A

Manufacturer

See full description

Specifications

Specifications

Network Specifications

Type
Router
Maximum Wireless Speed
1750 Mbps
Maximum LAN Speed
1000 Mbps
Portable Hotspot
No
Wi-Fi Generation
Wi‑Fi 6
Network Standards
IEEE 802.11a, IEEE 802.11 b/g/n, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.3ab, IEEE 802.3/3u
Wi-Fi Frequency
Dual Band (2.4 & 5GHz)

Connectivity

Wireless network
Yes
Ethernet LAN connections
4
ISDN Connection
No
SIM slot
No
WAN Port
Yes
GPON Port (Direct Fiber)
-

Security

Encryption Protocols
WEP, WPA-Personal, WPA2-Personal, WPA3-Personal, WPS
MAC Address Filtering
No

Extras

Virtual Private Network (VPN)
Yes
VoIP
No
Mesh
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Kostas Zar

    Verified purchase

    This review is about the network version: v2

    I bought it to use as a Mesh with the Cudy WR3000, but I was disappointed.
    The WiFi performance at a remote location is lower compared to the standalone WiFi of the WR3000 when I use it as standalone.
    Similarly, its standalone WiFi seems to lag behind compared to the WR3000, even though it is more expensive.
    Additionally, if someone uses a VPN and has it active on any of the devices (that are connected to the Cudy), it seems that the Kill Switch cannot be used, unlike with the WR3000 (probably due to a different structure up to the WAN port).

    Translated from Greek ·
    Did you find this review helpful?
  • I bought it to use as a Mesh with the Cudy WR3000, but I was disappointed.
    The WiFi performance at a remote location is lower compared to the standalone WiFi of the WR3000 when I use it as standalone.
    Similarly, its standalone WiFi seems to lag behind compared to the WR3000, even though it is more expensive.
    Additionally, if someone uses a VPN and has it active on any of the devices (that are connected to the Cudy), it seems that the Kill Switch cannot be used, unlike with the WR3000 (probably due to a different structure up to the WAN port).

    Translated from Greek ·
    0
  • See all

Description & Specifications

The Cudy X6 v1 router uses Wi‑Fi 6 and OFDMA technology to connect more devices and reduce latency. Wi‑Fi speeds reach up to 1,201 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz, while beamforming directs the signal towards connected devices. Its four high-gain antennas and independent Front-End module help boost the signal.

The dual-core processor supports network operation, while the four Gigabit LAN ports and Gigabit WAN port provide wired connections. The router supports a VPN client, Dynamic DNS and WPA3 security, as well as parental controls and guest network management.

  • Type: Router
  • Wi‑Fi generation: Wi‑Fi 6
  • Wi‑Fi bands: Dual Band 2.4 GHz and 5 GHz
  • Maximum Wi‑Fi speed: 1,750 Mbps
  • Wi‑Fi speed on 5 GHz: Up to 1,201 Mbps
  • Wi‑Fi speed on 2.4 GHz: Up to 574 Mbps
  • Wi‑Fi standards: IEEE 802.11a/b/g/n/ac/ax
  • Wi‑Fi technologies: OFDMA, beamforming, BSS Color, WMM
  • Processor: Dual-core
  • Flash memory: 16 MB
  • DDR memory: 256 MB
  • Antennas: 4 fixed high-gain omnidirectional antennas
  • Ethernet LAN ports: 4 Gigabit, 10/100/1000 Mbps
  • Maximum LAN speed: 1,000 Mbps
  • WAN port: 1 Gigabit, 10/100/1000 Mbps
  • WAN connection types: Dynamic IP, Static IP, PPPoE
  • Wi‑Fi security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, WPA3
  • VPN client: PPTP, L2TP, OpenVPN, WireGuard, IPSec, Zerotier
  • Network management: Parental controls, 2.4 GHz and 5 GHz guest network, DHCP Server, DHCP Client list, address reservation, Dynamic DNS
  • NAT features: Port Forwarding, Port Triggering, UPnP, DMZ
  • Buttons: WPS, Reset
  • Power supply: 12 V / 1 A

Manufacturer

Network Specifications

Type
Router
Maximum Wireless Speed
1750 Mbps
Maximum LAN Speed
1000 Mbps
Portable Hotspot
No
Wi-Fi Generation
Wi‑Fi 6
Network Standards
IEEE 802.11a, IEEE 802.11 b/g/n, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.3ab, IEEE 802.3/3u
Wi-Fi Frequency
Dual Band (2.4 & 5GHz)

Connectivity

Wireless network
Yes
Ethernet LAN connections
4
ISDN Connection
No
SIM slot
No
WAN Port
Yes
GPON Port (Direct Fiber)
-

Security

Encryption Protocols
WEP, WPA-Personal, WPA2-Personal, WPA3-Personal, WPS
MAC Address Filtering
No

Extras

Virtual Private Network (VPN)
Yes
VoIP
No
Mesh
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Kostas Zar

    Verified purchase

    This review is about the network version: v2

    I bought it to use as a Mesh with the Cudy WR3000, but I was disappointed.
    The WiFi performance at a remote location is lower compared to the standalone WiFi of the WR3000 when I use it as standalone.
    Similarly, its standalone WiFi seems to lag behind compared to the WR3000, even though it is more expensive.
    Additionally, if someone uses a VPN and has it active on any of the devices (that are connected to the Cudy), it seems that the Kill Switch cannot be used, unlike with the WR3000 (probably due to a different structure up to the WAN port).

    Translated from Greek ·
    Did you find this review helpful?
  • I bought it to use as a Mesh with the Cudy WR3000, but I was disappointed.
    The WiFi performance at a remote location is lower compared to the standalone WiFi of the WR3000 when I use it as standalone.
    Similarly, its standalone WiFi seems to lag behind compared to the WR3000, even though it is more expensive.
    Additionally, if someone uses a VPN and has it active on any of the devices (that are connected to the Cudy), it seems that the Kill Switch cannot be used, unlike with the WR3000 (probably due to a different structure up to the WAN port).

    Translated from Greek ·
    0
  • See all
53,10 €
14,00 €   shipping cost